Macro Airfoil Import & Scale
Popis |
---|
Trace the perimeter of a Airfoil from a .dat file. Version macro : 1.5 , 2.0 and 2.1 Date last modification : 2014-10-02 Autor: quick61 |
Autor |
quick61 |
Download |
None |
Odkazy |
Makro recepty| Jak nainstalovat makra Jak přizpůsobit panely nástrojů |
Verze |
1.5 , 2.0 and 2.1 |
Datum poslední úpravy |
2014-10-02 |
Verze FreeCAD |
None |
Výchozí zástupce |
None |
Viz též |
None |
Popis
Toto makro při spuštění nejprve poskytne uživateli souborový prohlížeč, který vyhledá a vybere textový soubor profilu dat .dat. Po zvolení se zadá délka akordů a po stisknutí tlačítka OK se vytvoří správně měřítko profilu. K dispozici jsou zde dvě verze. Verze 1.5 by měla pracovat na verzích FreeCADu, 0.13 stabilních i všech verzích 0.14. Verze 2 by měla být použita pouze s verzemi FreeCAD rovnajícími se nebo vyššími než 0.14 3077 a bude fungovat nejlépe s verzemi vytvořenými s verzemi OCE / OCC verze 6.7 nebo vyšší.
See also Common Airfoil Data Import
Jak používat - verze 1.5
Vyberte soubor
Spuštění makra nejprve zobrazí uživateli prohlížeč souborů, který vám umožní vybrat požadovaný soubor datového souboru. Projděte si, kam jste uložili soubor profilu, vyberte jej a stiskněte Otevřít.
Zadejte délku chordu
Po výběru souboru profilu se objeví nové dialogové okno s žádostí o délku akordů. Může být zadána libovolná délka, v milimetrech. Po zadání požadované délky vytvoří makro předběžný vodič (DWire) podle bodů popsaných v dříve vybraném souboru profilu .dat v měřítku, které jste zadali pro délku akordy.
Křídlový profil, správně měřítko, by nyní měl být ve vašem projektu připraven k použití.
Jak používat - verze 2
Volba souboru je stejná jako verze 1.5. S verzí 2 máte nyní možnost mít buď výsledný profil vytvořený pomocí DWire nebo Basic Spline (BSpline). Stejně jako u verze 1.5 zadáte požadovanou délku. Dále můžete vybrat, který typ fólie chcete. Stačí kliknout na přepínač BSpline nebo nechat jako výchozí DWire.
Makra
Version 1.5
Macro_Airfoil_Import_&_Scale.FCMacro
# # # #
#
# AIRFOIL IMPORT & SCALE v1.5
#
# Imports and scales an Airfoil in the form of a Draft Wire (DWire)
#
# # # #
from PySide import QtCore, QtGui
from PySide.QtGui import QLineEdit
import FreeCAD, FreeCADGui, Draft
import importAirfoilDAT
# Select .dat airfoil data file to be imported
filename = QtGui.QFileDialog.getOpenFileName(QtGui.qApp.activeWindow(),'Open An Airfoil File','*.dat')
class p():
def proceed(self):
try:
# This produces a scaled Airfoil with a DWire
scalefactor=float(self.s1.text())
f1=str(filename)
importAirfoilDAT.insert(f1,"Unnamed")
Draft.scale(App.ActiveDocument.ActiveObject,delta=App.Vector(scalefactor,scalefactor,scalefactor),center=App.Vector(0,0,0),legacy=True)
except:
FreeCAD.Console.PrintError("Error, not a valid .dat file\n")
self.close()
def close(self):
self.dialog.hide()
def __init__(self):
self.dialog = None
self.s1 = None
# Make dialog box and get the scale size
self.dialog = QtGui.QDialog()
self.dialog.resize(350,100)
self.dialog.setWindowTitle("Airfoil Import & Scale")
la = QtGui.QVBoxLayout(self.dialog)
t1 = QtGui.QLabel("Chord Length")
la.addWidget(t1)
self.s1 = QtGui.QLineEdit()
la.addWidget(self.s1)
# Add OK / Cancel buttons
#ori okbox = QtGui.QDialogButtonBox(self.dialog)
#ori okbox.setOrientation(QtCore.Qt.Horizontal)
#ori okbox.setStandardButtons(QtGui.QDialogButtonBox.Cancel -PIPE- QtGui.QDialogButtonBox.Ok)
# modify original code for install with addon-install cause -PIPE- 05-12-2016 FC 0.16
okbox = QtGui.QDialogButtonBox(self.dialog)
okbox.setOrientation(QtCore.Qt.Horizontal)
okbox.setStandardButtons(QtGui.QDialogButtonBox.Ok)
cancelbox = QtGui.QDialogButtonBox(self.dialog)
cancelbox.setOrientation(QtCore.Qt.Horizontal)
cancelbox.setStandardButtons(QtGui.QDialogButtonBox.Cancel)
cancelbox.move(0,62)
la.addWidget(okbox)
QtCore.QObject.connect(okbox, QtCore.SIGNAL("accepted()"), self.proceed)
QtCore.QObject.connect(cancelbox, QtCore.SIGNAL("rejected()"), self.close)
QtCore.QMetaObject.connectSlotsByName(self.dialog)
self.dialog.show()
self.dialog.exec_()
p()
Úprava výchozího výběru
Pokud si přejete, aby vaše importované a zmenšené profilové lišty byly vytvořeny s BSplines spíše než s DWires, Marco může být předem nastaven na Bspline. To se provádí úpravou řádku -
##exampleCode## self.radio1.setChecked(True)
- a změnu -
##exampleCode## self.radio2.setChecked(True)
A note on this is included within the text of the macro.
Version 2
# # # # # # AIRFOIL IMPORT & SCALE v2. # # Imports and scales an Airfoil in the form of a Draft Wire (DWire) or Basic Spline (BSpline) # # For FreeCAD Versions = or > 0.14 Revision 3077 # # Works best with OCC/OCE = or > 6.7 # # # # # from PySide import QtCore, QtGui from PySide.QtGui import QLineEdit, QRadioButton import FreeCAD, FreeCADGui, Draft import importAirfoilDAT # Select .dat airfoil data file to be imported filename = QtGui.QFileDialog.getOpenFileName(QtGui.qApp.activeWindow(),'Open An Airfoil File','*.dat') class p(): def proceed(self): if self.radio1.isChecked(): try: # This produces a scaled Airfoil with a DWire scalefactor=float(self.s1.text()) f1=str(filename) importAirfoilDAT.insert(f1,"Unnamed") Draft.scale(App.ActiveDocument.ActiveObject,delta=App.Vector(scalefactor,scalefactor,scalefactor),center=App.Vector(0,0,0),legacy=True) except: FreeCAD.Console.PrintError("Error, not a valid .dat file\n") self.close() if self.radio2.isChecked(): try: # This produces a scaled Airfoil with a BSpline scalefactor=float(self.s1.text()) f1=str(filename) importAirfoilDAT.insert(f1,"Unnamed") points = FreeCAD.ActiveDocument.ActiveObject.Points Draft.makeBSpline(points, closed=True) Draft.scale(App.ActiveDocument.ActiveObject,delta=App.Vector(scalefactor,scalefactor,scalefactor),center=App.Vector(0,0,0),legacy=True) App.getDocument("Unnamed").removeObject("DWire") except: FreeCAD.Console.PrintError("Error, not a valid .dat file\n") self.close() def close(self): self.dialog.hide() def __init__(self): self.dialog = None self.s1 = None # Make dialog box and get the scale size self.dialog = QtGui.QDialog() self.dialog.resize(350,100) self.dialog.setWindowTitle("Airfoil Import & Scale") la = QtGui.QVBoxLayout(self.dialog) t1 = QtGui.QLabel("Chord Length") la.addWidget(t1) self.s1 = QtGui.QLineEdit() la.addWidget(self.s1) # Add radio buttons to select between DWire and BSpline self.radio1 = QRadioButton("Make DWire") self.radio2 = QRadioButton("Make BSpline") # set default to DWire & make radio buttons - Change self.radio1.setChecked(True) to # self.radio2.setChecked(True) to set BSpline as default self.radio1.setChecked(True) la.addWidget(self.radio1) la.addWidget(self.radio2) # Add OK / Cancel buttons okbox = QtGui.QDialogButtonBox(self.dialog) okbox.setOrientation(QtCore.Qt.Horizontal) okbox.setStandardButtons(QtGui.QDialogButtonBox.Cancel|QtGui.QDialogButtonBox.Ok) la.addWidget(okbox) QtCore.QObject.connect(okbox, QtCore.SIGNAL("accepted()"), self.proceed) QtCore.QObject.connect(okbox, QtCore.SIGNAL("rejected()"), self.close) QtCore.QMetaObject.connectSlotsByName(self.dialog) self.dialog.show() self.dialog.exec_() p()
Version 2.1
Updated by mangtronix to use PySide instead of PyQt (used in older versions of FreeCAD)
# # # # # # AIRFOIL IMPORT & SCALE v2.1 # # Imports and scales an Airfoil in the form of a Draft Wire (DWire) or Basic Spline (BSpline) # # For FreeCAD Versions = or > 0.14 Revision 3703 # # Works best with OCC/OCE = or > 6.7 # # # # # from PySide import QtCore, QtGui from PySide.QtGui import QLineEdit, QRadioButton import FreeCAD, FreeCADGui, Draft import importAirfoilDAT # Select .dat airfoil data file to be imported # PySide returns a tuple (filename, filter) instead of just a string like in PyQt filename, filefilter = QtGui.QFileDialog.getOpenFileName(QtGui.qApp.activeWindow(),'Open An Airfoil File','*.dat') class p(): def proceed(self): global filename if self.radio1.isChecked(): #if True: try: # This produces a scaled Airfoil with a DWire scalefactor=float(self.s1.text()) f1=str(filename) importAirfoilDAT.insert(f1,"Unnamed") Draft.scale(App.ActiveDocument.ActiveObject,delta=App.Vector(scalefactor,scalefactor,scalefactor),center=App.Vector(0,0,0),legacy=True) except Exception, e: FreeCAD.Console.PrintError("Error, not a valid .dat file\n") self.close() if self.radio2.isChecked(): try: # This produces a scaled Airfoil with a BSpline scalefactor=float(self.s1.text()) f1=str(filename) importAirfoilDAT.insert(f1,"Unnamed") points = FreeCAD.ActiveDocument.ActiveObject.Points Draft.makeBSpline(points, closed=True) Draft.scale(App.ActiveDocument.ActiveObject,delta=App.Vector(scalefactor,scalefactor,scalefactor),center=App.Vector(0,0,0),legacy=True) App.getDocument("Unnamed").removeObject("DWire") except: FreeCAD.Console.PrintError("Error, not a valid .dat file\n") self.close() def close(self): self.dialog.hide() def __init__(self): self.dialog = None self.s1 = None # Make dialog box and get the scale size self.dialog = QtGui.QDialog() self.dialog.resize(350,100) self.dialog.setWindowTitle("Airfoil Import & Scale") la = QtGui.QVBoxLayout(self.dialog) t1 = QtGui.QLabel("Chord Length") la.addWidget(t1) self.s1 = QtGui.QLineEdit() la.addWidget(self.s1) # Add radio buttons to select between DWire and BSpline self.radio1 = QRadioButton("Make DWire") self.radio2 = QRadioButton("Make BSpline") # set default to DWire & make radio buttons - Change self.radio1.setChecked(True) to # self.radio2.setChecked(True) to set BSpline as default self.radio1.setChecked(True) la.addWidget(self.radio1) la.addWidget(self.radio2) # Add OK / Cancel buttons okbox = QtGui.QDialogButtonBox(self.dialog) okbox.setOrientation(QtCore.Qt.Horizontal) okbox.setStandardButtons(QtGui.QDialogButtonBox.Cancel|QtGui.QDialogButtonBox.Ok) la.addWidget(okbox) QtCore.QObject.connect(okbox, QtCore.SIGNAL("accepted()"), self.proceed) QtCore.QObject.connect(okbox, QtCore.SIGNAL("rejected()"), self.close) QtCore.QMetaObject.connectSlotsByName(self.dialog) self.dialog.show() self.dialog.exec_() p()
Link
Discussion on Forum
UIUC Applied Aerodynamics Group Departement of Aerospace Engineering