Part Coupes
Coupe de sections |
Emplacement du menu |
---|
Pièce → SectionCross |
Ateliers |
Part,Complet |
Raccourci par défaut |
Aucun |
Introduit dans la version |
- |
Voir aussi |
Aucun |
Description
The Cross-sections utility creates one or more cross-sections through the selected shape.
How to use
- Select a shape.
- Press the Cross-sections button.
- Define the guiding plane.
- Define the position (height of the cross-section).
- Optionally, check Sections to create more than one cross-section:
- Checking On both sides will distribute the cross-sections on each side of the guiding plane location.
- Set the count.
- Press OK.
Limitations
- The resulting object is not parametric, that is it is not linked to the original shape.
- A single object is created, even with more than one cross-section.