PartDesign Cilindro sottrattivo

From FreeCAD Documentation
Revision as of 22:06, 7 February 2018 by Renatorivo (talk | contribs) (Created page with "== Utilizzo ==")

Cilindro sottrattivo

Posizione nel menu
Part Design → Crea una primitiva sottrattiva → Cilindro
Ambiente
PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Primitive sottrattive

Descrizione

Inserisce un cilindro sottrattivo nel corpo attivo. La sua forma viene sottratta dal solido esistente.

disponibile dalla versione 0.17

A sinistra il corpo attivo (A) mostrato in grigio e il cilindro sottrattivo (B) mostrato in rosso trasparente; a destra il risultato.

Utilizzo

  1. Press the Subtractive Cylinder button. Note: the Subtractive Cylinder is part of an icon menu labelled Create an subtractive primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. To get to the Cylinder button, click on the down arrow besides the visible icon and select Subtractive cylinder in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Cylinder feature appears under the active Body.

Options

The Cylinder can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

  • DatiAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
  • DatiLabel: label given to the Cylinder object. Change to suit your needs.
  • DatiRadius: the radius value of the cylinder.
  • DatiAngle: angle of rotation of the cross section (360 degrees forms a full cylinder).
  • DatiHeight: the length of the cylinder along its axis.