Part Torus
Part Torus |
Menüeintrag |
---|
Part → Torus |
Arbeitsbereich |
Part, Complete |
Standardtastenkürzel |
Keiner |
Eingeführt in Version |
- |
Siehe auch |
Part CreatePrimitives |
Zusammenfassung
Erstellt wird ein parametrisierter Torus: Parameter sind der mittlere Ring- Radius dieses "Schwimmringes" und der Radius seines Querschnitts.
Erstellen
Im Arbeitsbereich Körper (workbench Part) auf das Symbol klicken. Zunächst entsteht ein vollständiger Torus mit mit mittlerem Ring-Radius 10 mm, und Querschnitt-Radius 2mm.
Werte wählen
Die gewünschten geometrischen Größen (parametrische Werte) werden als "Eigenschaften" in der "Combo-Ansicht" eingestellt. Die Erst-Werte lassen sich in der Spalte Werte überschreiben.
A torus can be assimilated to a small disc that makes a circular orbit around an imaginary axe. Thus the parametric torus is defined by the following parameters:
- Radius1: Radius of the circle around which the disc circulate
- Radius2: Radius of the disc defining the form of the torus
- Angle1: 1st angle to cut / define the disc of the torus
- Angle2: 2nd angle to cut / define the disc of the torus
- Angle3: 3rd angle to define the circumference of the torus.
as well as the standard set of placement parameters. The pictures below give a visual overview of the parameters antecedently mentioned:
The parameter Radius1 has a value of 20 mm.
The parameter Radius2 has a value of 2 mm.
The parameter Angle1 has a value of -90°. Notice that, the "angle measure" tool cannot display negative angle. Considered the displayed value in picture as "-90°".
The parameter Angle2 has a value of 90°.
The parameter Angle3 has a value of 90°.