Vazba Bod na bod

From FreeCAD Documentation
Revision as of 10:37, 7 January 2017 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Constraint PointOnPoint

Menu location
Sketch → Sketcher constraints → Constrain coincident
Workbenches
Sketcher, PartDesign
Default shortcut
None
Introduced in version
-
See also
Constraint Lock, Constraint Point onto Object


"Vytváří vazbu totožnosti na vybrané položce"

Popis

Tento vazbový nástroj vezme dva body jako své argumenty a slouží k tomu, že je udělá totožné. (Znamená to, že je udělá jako-jeden-bod). V praxi je tento nástroj užitečný když je např. mezera mezi dvěma koncovými body přímek, které mají být spojeny - vazba totožnosti na jejich koncové body tuto mezeru uzavře.

This constraint tool takes two points as its argument and serves to make the two points coincident. (Meaning to make them as-one-point).

In practical terms this constraint tool is useful when there is a break in a profile for example - where two lines end near each other and need to be joined - a coincident constraint on their end-points will close the gap.

Použití

Jak je uvedeno výše, tento nástroj přijímá dva argumenty - oba jsou to body.

  1. Nejdříve je nutné vysvítit dva různé body. (Připomínám, že to nebude fungovat jestli se např. pokusíte vybrat počáteční a koncový bod jedné přímky).
  2. Vysvícení nakreslených položek dosáhnete posunem myši nad položku a kliknutím levým tlačítkem myši.
  3. Vysvícená položka změní barvu na zelenou.
  4. následující položky mohou být vysvíceny opakováním výše uvedeného postupu POZNÁMKA: není potřeba zároveň držet stisknutou nějakou další klávesu, jako např. CTRL, abychom dosáhli vícenásobného výběru položek na výkrese.
  5. Jakmile máte vybrány dva body, kliknutím levým tlačítkem myši na vazbu 'BodNaBod' zajistí, že se body stanou totožné a jsou nahrazeny jedním bodem.

POZNÁMKA: Kvůli nastavení totožnosti bodů, musí FreeCAD nutně posunout jeden nebo oba původní body.

NOTE: In order to make two points coincident, FreeCAD must necessarily move one, or both, of the original points.

Scripting

The constraint can be created from macros and from the python console by using the following command:

Sketch.addConstraint(Sketcher.Constraint('Coincident',LineFixed,PointOfLineFixed,LineMoving,PointOfLineMoving))

where :

  • Sketch is a sketch object
  • LineFixed is the number of the line, that will not move by applying the constraint
  • PointOfLineFixed is the number of the vertex of the line LineFixed that has to fulfilled the constraint
  • LineMoving is the number of the line, that will move by applying the constraint
  • PointOfLineMoving is the number of the line LineMoving, that has to fulfilled the constraint

The main issue by using this function is to identify correctly the line number and the vertex number of the lines you want to process.

Let us take an example to explain the method to identify correctly the line number and vertex number. Identifying the numbering of a line.

I have drawn three lines as shown in figure 1.

TO BE CONTINUED...