Part Torus
Part Torus |
Ubicación en el Menú |
---|
Part → Torus |
Entornos de trabajo |
Part, Complete |
Atajo de teclado por defecto |
Ninguno |
Introducido en versión |
- |
Ver también |
Part CreatePrimitives |
Crea un toro paramétrico simple, con los parámetros de posición, ángulo1, ángulo2, ángulo3, radio1 y radio2. El toro se posicionará en el origen (point 0,0,0). Los parámetros de ángulo permiten crear una porción del toro en lugar de uno completo (están establecidos como 360° por defecto), los radios 1 y 2 definen respectivamente el tamaño del agujero y del anillo del toro.
How to use
In the Part workbench click on the torus icon . The torus will be positioned at origin (point 0,0,0) on creation. The angle parameters (angle1, angle2, angle3), as well as the radius parameter ( radius1 , radius2) parameters permit to parametrize the torus. The angle parameters permit to make a portion of torus instead of a full one (they are set to 360° by default), the radius 1 and 2 define respectively the size of the hole and the ring thickness of the torus.