Návrh dílu Polární vzorky
PartDesign PolarPattern |
Menu location |
---|
PartDesign -> PolarPattern |
Workbenches |
PartDesign, Complete |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Úvod
'Vytvočení polárního vzoru objektu' - Tento nástroj vezme skupinu jednoho nebo více objektů (originály) a vytvoří z nich druhou skupinu objektů pootočenou kolem dané osy. Například:
Volby
Při vytvoření polárních vzorků nabízí doalogové okno 'parametry polarního vzoru' dva odlišné způsoby specifikování rotační osy. Standardní osaRadio tlačítkem může vybrána jedna z os X, Y nebo Z. Směr vzorkování může být změněn zakliknitím políčka 'Opačný směr'. Výběr plochyStisknutí tlačítka označeného 'Směr' umožňuje výběr hrany existujícího tělesa pro určení směru. Připomínám, že tlačítko musí být stisknuto pokaždé při výběru nové hrany. Výběr originálůSeznam v okénku ukazuje 'originály', objekty které budou vzorkovány. Kliknutí na libovolný objekt jej přidá do seznamu. Úhel a výskytyUrčuje úhel, který má být vzorky pokryt a celkový počet vzorků (včetně originálního). Například čtyři výskyty v úhlu 180 stupňů dá 60 stupnů mezi vzorky. Je zde jedna výjimka: Je-li úhel 360, protože první a poslední výskyt je identický, čtyři výskyty budou po 90 stupních. |
Options
When creating a polar pattern feature, the 'polar pattern parameters' dialogue offers two different ways of specifying the pattern rotation axis.
Normal sketch axis
An axis being normal to the sketch and starting in the origin of the sketch of the feature being used is taken as axis for the polar pattern.
The pattern direction can be reversed by ticking 'Reverse direction'.
Select reference
Here you can select an edge as a reference.
If that option is chosen only the edge of a feature being used just before the polar pattern-operation is choosable.
So you are able to use this option by:
- creating a helper feature (for example a pad) with on of the edges being the axis of the polar pattern
- create feature (pad or pocket) to be patterned
- select polar pattern feature and select edge as reference
- use another helper feature (for example pocket) to remove your first helper feature.
The pattern direction can be reversed by ticking 'Reverse direction'.
Angle and Occurrences
Specifies the angle to be covered by the pattern, and the total number of pattern shapes (including the original feature). For example, four occurrences in an angle of 180 degrees would give a spacing of 60 degrees between patterns. There is one exception: If the angle is 360 degrees, since first and last occurrence are identical, four occurrences will be spaced 90 degrees apart.
Omezení
- Podívejte se na Lineární vzorky