Sketcher "Ограничение расстояния по горизонтали"
Constraint HorizontalDistance |
Системное название |
---|
Constraint HorizontalDistance |
Расположение в меню |
Sketch → Ограничения эскиза → Ограничения расстояния по горизонтали |
Верстаки |
Sketcher, PartDesign |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
Ограничения расстояния, Ограничения расстояния по вертикали |
Description
Fixes the horizontal distance between 2 points or line ends. If only one item is selected, the distance is set to the sketch origin.
Usage
Note: the constraint tool can also be started with no prior selection, but will require selection of two points, including the the sketch origin point to set the distance to the origin. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.