PartDesign MuoverePunta

From FreeCAD Documentation
Revision as of 18:30, 26 February 2018 by Renatorivo (talk | contribs) (Created page with "'''Usa come entità finale''' poiché questo comando è etichettato nel menu contestuale ridefinisce la cima, che è la caratteristica finale del corpo. Di default, la cima è...")

Usa come entità finale

Posizione nel menu
Menu contestuale → Usa come entità finale
Ambiente
PartDesign
Avvio veloce
None
Introdotto nella versione
-
Vedere anche
Sposta in altro corpo, Sposta dopo altro oggetto

Descrizione

Usa come entità finale poiché questo comando è etichettato nel menu contestuale ridefinisce la cima, che è la caratteristica finale del corpo. Di default, la cima è l'ultima caratteristica aggiunta al Body; ma a volte può essere utile impostare temporaneamente la cima su una funzione precedente nell'albero. Questo può servire per aggiungere uno schizzo, una geometria di riferimento o una caratteristica che, in retrospettiva, avrebbe dovuto essere creata in precedenza nella cronologia del corpo.

The tip is visually distinguished in the Model tree by a small white down arrow in a green circle overlayed on the feature's icon.

disponibile dalla versione 0.17

Utilizzo

  1. In the Model tree, right-click on the feature to set as tip.
  2. Select Set tip.
  3. The new tip is set to visible, and all elements below the tip are hidden from view. Elements newly created from that point will be placed under the tip, and above the other existing elements.

Note: it is important not to forget to set the tip again to the last feature at the bottom of the Body tree.