SheetMetal Unfold
This documentation is not finished. Please help and contribute documentation.
GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.
See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.
|
Menu location |
---|
SheetMetal → Unfold |
Workbenches |
SheetMetal |
Default shortcut |
U |
Introduced in version |
- |
See also |
SheetMetal UnattendedUnfold |
Description
The SheetMetal Unfold command unfolds a sheet metal object.
Usage
- Select a planar face of the sheet metal part.
- Activate the
Unfold command using one of the following:
- Adjust unfolding options in the task panel by:
- Selecting the projection options of the unfold sketch.
- Selecting the method of bend deduction with K-factor:
- Use a Material Definition Sheet.
- Select a manual K-factor then the ANSI or DIN standard to apply
Properties
See also: Property editor.
A SheetMetal Unfold object is derived from a Part Feature object and inherits all its properties. It has no additional properties, but its label has a default value:
Data
Base
- DataLabel (
String
): Default value:Unfold
(+ a sequential number for second and following items).
The user editable name of this object, it may be any arbitrary UTF8 string.
Limitations
- Sheet metal should have constant thickness
- Flat faces should be planar with no split lines, not B-spline like
- Bend angles should be radius with cylindrical faces, not B-spline like
- Unfold feature is not parametric at the moment. If the model is modified, then you have to unfold it again.