Translations:Manual:Modeling for product design/11/zh-cn: Difference between revisions

From FreeCAD Documentation
(Created page with "* 现在,让我们添加三个额外的约束: ** 选中垂直段中的一个,然后添加一个 16px 垂直距离约束。将其设定为 23.7 毫米。 ** 选中水平段中的一个,然后添加一个 16px 水平距离约束。将其设定为 47.7 毫米。 ** 最后,选中角点中的一个,然后选择原...")
 
(No difference)

Latest revision as of 06:54, 14 November 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manual:Modeling for product design)
* Now, let's add three more constraints:
** Select one of the vertical segments and add a [[Image:Constraint_VerticalDistance.svg|16px]] [[Sketcher ConstrainDistanceY|Vertical Distance Constraint]]. Give it a size of 23.7mm.
** Select one of the horizontal segments and add a [[Image:Constraint_HorizontalDistance.svg|16px]] [[Sketcher ConstrainDistanceX|Horizontal Distance Constraint]]. Make it 47.7mm.
** Finally, select one of the corner points, then the origin point (which is the dot at the crossing of the red and green axes), then add a [[Image:Constraint_PointOnPoint.svg|16px]] [[Sketcher ConstrainCoincident|Coincident Constraint]]. The rectangle will then jump to the origin point, and your sketch will turn green, meaning it is now fully constrained. You can try moving its lines or points, nothing will move anymore.
  • 现在,让我们添加三个额外的约束:
    • 选中垂直段中的一个,然后添加一个 垂直距离约束。将其设定为 23.7 毫米。
    • 选中水平段中的一个,然后添加一个 水平距离约束。将其设定为 47.7 毫米。
    • 最后,选中角点中的一个,然后选择原点(就是红色和绿色轴线交叉处的点),然后添加一个 重合约束。矩形将会跳至原点,你的草图会变成绿色,这意味着它现在已经完全被约束了。你可以尝试移动其线条或点,但它们不会再移动。