Translations:Draft Split/5/en

From FreeCAD Documentation
Revision as of 19:53, 7 December 2023 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  1. There are several ways to invoke the command:
    • Press the Split button.
    • Select the Modification → Split option from the menu.
    • Use the keyboard shortcut: S then P.
  2. Move the pointer over the correct edge of a Draft Line or Draft Wire.
  3. The edge is highlighted.
  4. Do one of the following:
    • If the wire is closed:
      • Pick any point on the edge.
      • The edge is detached from the wire and becomes a separate wire.
    • If the wire is open:
      • Pick the correct point on the edge. See Notes.
      • The wire is split at the picked point.