Surface GeomFillSurface/it: Difference between revisions

From FreeCAD Documentation
(Created page with "== Opzioni ==")
(Created page with "== Proprietà ==")
Line 15: Line 15:




==Properties==
== Proprietà ==


{{PropertyData|Fill Type}}: The applied filling algorithm
{{PropertyData|Fill Type}}: The applied filling algorithm

Revision as of 17:07, 29 April 2018

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Riempi le curve del contorno

Posizione nel menu
Superficie → Riempi le curve del contorno
Ambiente
Superficie
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno

Description

This tool creates a surface from two, three or four boundary edges. Three different filling styles are available: Curved, Coons, Stretch. The tool creates a smooth transition between the boundary edges.

Utilizzo

  1. Press the Fill boundary curves button.
  2. Select edges in the 3D-view. The edges must connect together in order to give a closed profile.
  3. Set options and press OK.

Opzioni

Proprietà

DatiFill Type: The applied filling algorithm

  • Curved – the style with the most rounded patches.
  • Coons – a rounded style with less depth than Curved
  • Stretch – the style with the flattest patches

Limitations

It is not possible to apply additional constraints to the surface.


Other languages: