Sketcher Ajuster

From FreeCAD Documentation
Revision as of 03:26, 12 November 2018 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Ajuster l'arête

Emplacement du menu
Sketch → Sketcher geometries → Trim edge
Ateliers
Sketcher, PartDesign
Raccourci par défaut
T
Introduit dans la version
-
Voir aussi
Aucun

Description

L'outil Ajuster, ajuste la ligne jusque la première intersection rencontrée, à l'intérieur ou à l'extérieur d'une forme.

Utilisation

Cliquez sur le bouton Ajuster, puis cliquez sur la portion de ligne à ajuster (effacer)

  1. Press the trim edge button. The mouse pointer turns into a white cross with a red trim symbol.
  2. Click on the edge that you want to trim.
  3. The line segment will be trimmed to the nearest overlapping line(s). If there are other sketch elements on both sides of the clicked position, the clicked piece is cut out.
  4. Pressing ESC or pressing the right mouse button will terminate the function.

Limitations

  • Arcs of hyperbola, arcs of parabola and B-splines cannot be trimmed at this time.