Sketcher ReorientSketch: Difference between revisions
mNo edit summary |
(Marked this version for translation) |
||
Line 6: | Line 6: | ||
Allows you to detach a sketch from a face and attach it to one of the main planes (with an offset). |
Allows you to detach a sketch from a face and attach it to one of the main planes (with an offset). |
||
=== Use ===<!--T:3--> |
=== Use === <!--T:3--> |
||
#Select the sketch to be re-oriented in the tree-view |
#Select the sketch to be re-oriented in the tree-view |
||
#Choose {{KEY| Sketch}} → {{KEY| Reorient sketch}} from the top menu |
#Choose {{KEY| Sketch}} → {{KEY| Reorient sketch}} from the top menu |
Revision as of 15:36, 15 March 2016
Sketcher Reorient |
Menu location |
---|
Part design → Reorient sketch |
Workbenches |
Sketcher, PartDesign |
Default shortcut |
None |
Introduced in version |
- |
See also |
Map sketch, New Sketch |
Description
Allows you to detach a sketch from a face and attach it to one of the main planes (with an offset).
Use
- Select the sketch to be re-oriented in the tree-view
- Choose Sketch → Reorient sketch from the top menu
- A menu will pop up and ask you if you want to detach the sketch from its face
- Selecting "Yes" will give you the same menu as in Sketch → New Sketch
- You can attach the sketch to one of the main planes
- You also have the possibility to add a positive or negative offset
Note
When selecting cancel in the second menu the sketch is simply detached from its face.