Sketcher CreateArcOfHyperbola/es: Difference between revisions

From FreeCAD Documentation
(Created page with "==Descripción==")
(Created page with "==Utilización==")
Line 17: Line 17:
{{Version|0.17}}
{{Version|0.17}}


==How to use==
==Utilización==


# Press the {{KEY|[[File:Sketcher Hyperbolic Arc.png|24px]] '''Create an arc of hyperbola'''}} button.
# Press the {{KEY|[[File:Sketcher Hyperbolic Arc.png|24px]] '''Create an arc of hyperbola'''}} button.

Revision as of 03:26, 5 November 2018

Sketcher arco de hipérbola

Ubicación en el Menú
Sketch → Geometrías de croquis → Crear un arco de hipérbola
Entornos de trabajo
Sketcher
Atajo de teclado por defecto
Ninguno
Introducido en versión
0.17
Ver también
Sketcher arco de elipse, Sketcher arco de parábola

Descripción

This tool creates an arc of hyperbola by center, major radius and endpoints.

introduced in version 0.17

Utilización

  1. Press the Create an arc of hyperbola button.
  2. Click in the 3D view to define the major radius center (labelled 1 in the picture above).
  3. Click in the 3D view to define the major radius length, which is also the tip of the arc of hyperbola (labelled 2 in the picture above).
  4. Move the mouse away from the two last selected points to see how the arc will look like. Click again when the approximate desired curvature is shown. This point will define the first end point (labelled 3 in the picture above).
  5. Click a fourth time in the 3D view to define the other end point (labelled 4 in the picture above).