Sketcher ConstrainParallel/cs: Difference between revisions

From FreeCAD Documentation
(Created page with "====Popis==== Vazba rovnoběžnosti zajistí, že dvě vybrané přímky nebo hrany jsou vzájemně rovnoběžné.")
(Created page with "====Postup==== Náčrt obsahuje dvě náhodně orientované přímky.")
Line 4: Line 4:
Vazba rovnoběžnosti zajistí, že dvě vybrané přímky nebo hrany jsou vzájemně rovnoběžné.
Vazba rovnoběžnosti zajistí, že dvě vybrané přímky nebo hrany jsou vzájemně rovnoběžné.


====Operation====
====Postup====
Náčrt obsahuje dvě náhodně orientované přímky.
The sketch contains two randomly oriented lines.


[[File:ConstrainParallel1.png|256px]]
[[File:ConstrainParallel1.png|256px]]

Revision as of 17:42, 14 January 2014

Constraint Parallel

Menu location
Sketch → Sketcher constraints → Constrain parallel
Workbenches
Sketcher, PartDesign
Default shortcut
None
Introduced in version
-
See also
Constraint Vertical, Constraint Horizontal

Popis

Vazba rovnoběžnosti zajistí, že dvě vybrané přímky nebo hrany jsou vzájemně rovnoběžné.

Postup

Náčrt obsahuje dvě náhodně orientované přímky.

Select both lines by clicking successively on each of them.

Apply the Constrain Parallel constraint by selecting the Constrain Parallel icon from the Sketcher constraints toolbar or by selecting the Constraint Parallel menu item from the Sketcher constraints sub menu of the Sketcher (Sketcher workbench selected) or Part Design (Part Design workbench selected) menu item.

The selected lines are forced to be parallel to each other. Changing the orientation of one line will change the orientation of the other to be the same.