Sketcher ConstrainBlock/it: Difference between revisions

From FreeCAD Documentation
(Created page with "Sketcher: Fissa")
 
(Created page with "{{GuiCommand/it |Name=Sketcher ConstrainBlock |Nmae/it=Fissa |Workbenches=Sketcher |MenuLocation=Sketch → Vincoli → Fissa |SeeAlso=Sketcher_Con...")
Line 1: Line 1:
<languages/>
<languages/>
{{GuiCommand
{{GuiCommand/it
|Name=Sketcher ConstrainBlock
|Name=Sketcher ConstrainBlock
|Nmae/it=Fissa
|Workbenches=[[Sketcher Workbench|Sketcher]]
|Workbenches=[[Sketcher Workbench/it|Sketcher]]
|MenuLocation=Sketch → Sketcher constraintsConstrain Block
|MenuLocation=Sketch → VincoliFissa
|SeeAlso=[[Sketcher_ConstrainLock|Constrain Lock]]
|SeeAlso=[[Sketcher_ConstrainLock/fr|Blocca]]
}}
}}



Revision as of 04:58, 8 October 2018

Sketcher ConstrainBlock

Posizione nel menu
Sketch → Vincoli → Fissa
Ambiente
Sketcher
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Blocca

Description

Constrain Block blocks a geometric element in place with a single constraint. Its main intended use is to work with B-Splines which can be difficult to fully constrain otherwise.

introduced in version 0.17

How to use

  1. Select an element to constrain;
  2. Press the Constrain Block button.

Note: step 1 and 2 can be reversed.