Sketcher Clone/it: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
No edit summary
Line 17: Line 17:
}}
}}


<div class="mw-translate-fuzzy">
==Descrizione==
==Descrizione==
Clona gli elementi selezionati dello schizzo da un punto a un altro, utilizzando l'ultimo punto selezionato come riferimento
</div>


Clones the selected sketch elements from one point to another, using the last selected point as reference. If any constraints are part of the source elements, then the new constraints are linked to the source constraints; if the constraints in the source are changed, the constraints in the clone are also changed. To avoid this linking see [[Sketcher Copy]].
Clones the selected sketch elements from one point to another, using the last selected point as reference. If any constraints are part of the source elements, then the new constraints are linked to the source constraints; if the constraints in the source are changed, the constraints in the clone are also changed. To avoid this linking see [[Sketcher Copy]].

Revision as of 19:30, 2 December 2018

Sketcher Clona

Posizione nel menu
Sketch → Strumenti → Clona
Ambiente
Sketcher
Avvio veloce
Nessuno
Introdotto nella versione
0.16
Vedere anche
Sketcher Copia, Sketcher Sposta

Descrizione

Clones the selected sketch elements from one point to another, using the last selected point as reference. If any constraints are part of the source elements, then the new constraints are linked to the source constraints; if the constraints in the source are changed, the constraints in the clone are also changed. To avoid this linking see Sketcher Copy.

Note that a clone of a clone becomes a Sketcher Copy. If you wish to create linked constraints, clone the original source elements again.

Uso

  1. Selezionare l'elemento dello schizzo che si desidera clonare.
  2. Cliccare su o scegliere Sketch Strumenti Clona dal menu in alto.
  3. Posizionare il clone nella vista 3D.

Per il clone non vengono aggiunti vincoli specifici.

  1. Select the sketch elements to clone.
  2. Click on or choose Sketch Sketcher tools Clone from the top menu.
  3. Place clone in the 3D-View.

No extra constraints for clone-behaviour are added.