Ship LoadExample/it: Difference between revisions
Renatorivo (talk | contribs) (Created page with "{{GuiCommand/it|Name=Ship Load Example|Name/it=Carica esempio |MenuLocation=Ship design → Carica un esempio di geometria di una nave||Workbenches=Ship Workbench/it|S...") |
Renatorivo (talk | contribs) (Created page with "==Tutorial==") |
||
Line 32: | Line 32: | ||
== |
==Tutorial== |
||
* [[FreeCAD-Ship s60 tutorial ]] |
* [[FreeCAD-Ship s60 tutorial ]] |
Revision as of 21:23, 18 May 2016
Carica esempio |
Posizione nel menu |
---|
Ship design → Carica un esempio di geometria di una nave |
Ambiente |
Ship |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
Nessuno |
Introduction
Ship works over Ship entities, that must be created on top of provided geometry. Geometry must be a solid, or set of solids, following criteria must be taken into account:
- All hull geometry must be provided (including symmetric bodies).
- Starboard geometry must be included at negatives y domain.
- Origin (0,0,0) point is the Midship section (Midpoint between after and forward perpendicular) and base line intersection.
Loading Series 60 geometry
In order to help new users Ship includes a geometries examples loader, with the following to choose from:
- Series 60 from Iowa University
- Wigley Canonical Ship
- Series 60 Catamaran
- Wigley Catamaran
Executing the tool (Ship design/Load an example ship geometry) a task dialogue will shown. Select Series 60 from Iowa University and press Accept. Tool loads new document with s60_IowaUniversity geometry.
Tutorial