Robot tutorial/zh-hans: Difference between revisions

From FreeCAD Documentation
(Created page with "== 开始之前 == 本指南用于FreeCAD 0.16.6703及以上版本,如果你没有在你的电脑上安装FreeCAD,请前往 下载 页面并完成安装。")
(Created page with "本指南的目标是用于[http://en.wikipedia.org/wiki/Industrial_robot 工业机器人],并不是用在移动或者服务机器人(详见 [http://en.wikipedia.org/wiki/Ro...")
Line 14: Line 14:
本指南用于FreeCAD 0.16.6703及以上版本,如果你没有在你的电脑上安装FreeCAD,请前往 [[下载]] 页面并完成安装。
本指南用于FreeCAD 0.16.6703及以上版本,如果你没有在你的电脑上安装FreeCAD,请前往 [[下载]] 页面并完成安装。


This tutorial is targeting on the use of [http://en.wikipedia.org/wiki/Industrial_robot industrial robots]
本指南的目标是用于[http://en.wikipedia.org/wiki/Industrial_robot 工业机器人],并不是用在移动或者服务机器人(详见 [http://en.wikipedia.org/wiki/Robot#Modern_robots]).
and not mobile or service robots (see [http://en.wikipedia.org/wiki/Robot#Modern_robots here]).


==Setting up the scene==
==Setting up the scene==

Revision as of 12:48, 15 December 2019

Tutorial
Topic
Robot Workbench
Level
Beginner
Time to complete
Authors
r-frank
FreeCAD version
0.16.6703
Example files
See also
None

本指南用于指导你如何使用机器人工作台来模拟一个机器人单元的设置。

开始之前

本指南用于FreeCAD 0.16.6703及以上版本,如果你没有在你的电脑上安装FreeCAD,请前往 下载 页面并完成安装。

本指南的目标是用于工业机器人,并不是用在移动或者服务机器人(详见 [1]).

Setting up the scene

  1. Switch to the Robot Workbench
  2. Create a new document by choosing File New from the top menu
  3. Insert a Kuka IR500 robot into the scene by choosing Robot Insert Robots Kuka IR500 from the top menu
  4. Change to axonometric view by clicking on
  5. Zoom to fit all by clicking on
  6. Save your file ...

Setting up a trajectory

  1. Switch to the Robot Workbench
  2. Activate the model-tab in the tree view by clicking on it
  3. Create a new trajectory by clicking on
  4. Select the robot in the tree view
  5. Set home position for robot by clicking on
  6. Switch to the Task Panel
  7. By using the sliders change robot position
  8. When robot and trajectory are selected in tree view clicking on will insert the way-point in the trajectory
  9. Each way-point is shown with a yellow cross, the waypoints are connected with orange lines
  10. Define at least three different way points and insert them in the trajectory

Simulating robot movement

  1. Select robot and trajectory in tree view
  2. Select simulation by clicking on
  3. Click on Play-Button I>
  4. Watch simulation