Robot tutorial/fr: Difference between revisions

From FreeCAD Documentation
(Created page with "Category:Tutorials/fr")
(Updating to match new version of source page)
Line 1: Line 1:
{{TutorialInfo
|Topic= Robot Workbench
|Level= Beginner
|Time=
|Author=r-frank
|FCVersion=0.16.6703
|Files=
}}

Ce tutoriel a pour but de vous apprendre à utiliser l'[[Robot Workbench/fr|atelier de simulation de Robot]] pour simuler une cellule de configuration de robot.
Ce tutoriel a pour but de vous apprendre à utiliser l'[[Robot Workbench/fr|atelier de simulation de Robot]] pour simuler une cellule de configuration de robot.


Line 7: Line 16:


[[Category:Tutorials/fr]]
[[Category:Tutorials/fr]]

==Setting up a trajectory==
#Switch to the [[Robot Workbench]]
#Activate the model-tab in the tree view by clicking on it
#Create a new trajectory by clicking on [[Image:Robot_CreateTrajectory.png]]
#Select the robot in the tree view
#Set home position for robot by clicking on [[Image:Robot_SetHomePos.png|32px]]
#Switch to the Task Panel
#By using the sliders change robot position
#When robot and trajectory are selected in tree view clicking on [[Image:Robot_InsertWaypoint.png]] will insert the way-point in the trajectory
#Each way-point is shown with a yellow cross, the waypoints are connected with orange lines
#Define at least three different way points and insert them in the trajectory

==Simulating robot movement==
#Select robot and trajectory in tree view
#Select simulation by clicking on [[Image:Robot_Simulate.png|32px]]
#Click on Play-Button {{KEY| I> }}
#Watch simulation

[[Image:Robot_Tutorial_RobotSimulation.gif]]

[[Category:Tutorials]]


{{clear}}
{{clear}}

Revision as of 19:55, 11 May 2016

Tutorial
Topic
Robot Workbench
Level
Beginner
Time to complete
Authors
r-frank
FreeCAD version
0.16.6703
Example files
See also
None

Ce tutoriel a pour but de vous apprendre à utiliser l'atelier de simulation de Robot pour simuler une cellule de configuration de robot.

Avant de commencer

Ce tutoriel est écrit pour FreeCAD version 0.11 R3977 ou ultérieure. Si vous n'avez pas FreeCAD sur votre PC, allez à la page de téléchargement afin de l'installer.

Ce tutoriel vise l'utilisation des robots industriels et pas les robots mobiles ou de service (voir ici).

Setting up a trajectory

  1. Switch to the Robot Workbench
  2. Activate the model-tab in the tree view by clicking on it
  3. Create a new trajectory by clicking on
  4. Select the robot in the tree view
  5. Set home position for robot by clicking on
  6. Switch to the Task Panel
  7. By using the sliders change robot position
  8. When robot and trajectory are selected in tree view clicking on will insert the way-point in the trajectory
  9. Each way-point is shown with a yellow cross, the waypoints are connected with orange lines
  10. Define at least three different way points and insert them in the trajectory

Simulating robot movement

  1. Select robot and trajectory in tree view
  2. Select simulation by clicking on
  3. Click on Play-Button I>
  4. Watch simulation