Robot tutorial: Difference between revisions
Renatorivo (talk | contribs) (Marked this version for translation) |
mNo edit summary |
||
Line 1: | Line 1: | ||
<translate> |
<translate> |
||
<!--T:5--> |
|||
{{TutorialInfo |
|||
|Topic= Robot Workbench |
|||
|Level= Beginner |
|||
|Time= |
|||
|Author= |
|||
|FCVersion=0.14.3700 |
|||
|Files= |
|||
}} |
|||
<!--T:1--> |
<!--T:1--> |
||
This tutorial is here to teach you how to use the [[Robot Workbench]] to simulate a robot cell set-up. |
This tutorial is here to teach you how to use the [[Robot Workbench]] to simulate a robot cell set-up. |
||
== |
== Before you begin == <!--T:2--> |
||
This tutorial is written for FreeCAD Version 0. |
This tutorial is written for FreeCAD Version 0.14.3700 or higher. So if you don't have FreeCAD on your |
||
computer go to the [[Download]] page and do the installation. |
computer go to the [[Download]] page and do the installation. |
||
Revision as of 07:20, 3 May 2016
Tutorial |
Topic |
---|
Robot Workbench |
Level |
Beginner |
Time to complete |
Authors |
FreeCAD version |
0.14.3700 |
Example files |
See also |
None |
This tutorial is here to teach you how to use the Robot Workbench to simulate a robot cell set-up.
Before you begin
This tutorial is written for FreeCAD Version 0.14.3700 or higher. So if you don't have FreeCAD on your computer go to the Download page and do the installation.
This tutorial targeting on the use of industrial robots and not mobile or service robots (see here).