Robot tutorial: Difference between revisions

From FreeCAD Documentation
(Marked this version for translation)
mNo edit summary
Line 1: Line 1:
<translate>
<translate>
<!--T:5-->
{{TutorialInfo
|Topic= Robot Workbench
|Level= Beginner
|Time=
|Author=
|FCVersion=0.14.3700
|Files=
}}

<!--T:1-->
<!--T:1-->
This tutorial is here to teach you how to use the [[Robot Workbench]] to simulate a robot cell set-up.
This tutorial is here to teach you how to use the [[Robot Workbench]] to simulate a robot cell set-up.


== before you begin == <!--T:2-->
== Before you begin == <!--T:2-->
This tutorial is written for FreeCAD Version 0.11 R3977 or higher. So if you don't have FreeCAD on your
This tutorial is written for FreeCAD Version 0.14.3700 or higher. So if you don't have FreeCAD on your
computer go to the [[Download]] page and do the installation.
computer go to the [[Download]] page and do the installation.



Revision as of 07:20, 3 May 2016

Tutorial
Topic
Robot Workbench
Level
Beginner
Time to complete
Authors
FreeCAD version
0.14.3700
Example files
See also
None

This tutorial is here to teach you how to use the Robot Workbench to simulate a robot cell set-up.

Before you begin

This tutorial is written for FreeCAD Version 0.14.3700 or higher. So if you don't have FreeCAD on your computer go to the Download page and do the installation.

This tutorial targeting on the use of industrial robots and not mobile or service robots (see here).