Note di rilascio della versione 0.15

From FreeCAD Documentation
Revision as of 19:31, 14 April 2015 by Renatorivo (talk | contribs)

FreeCAD 0.15 è stato rilasciato il giorno 8 Aprile 2015. Questo è un riassunto dei cambiamenti più interessanti. L'elenco completo delle modifiche è disponibile in Mantis changelog. Versioni precedenti in: 0.14 - 0.13 - 0.12 - 0.11


Spark Plug Plane by r-frank

Aspetti generali

Casella di ricerca nella Vista Selezione

La finestra Selezione permette agli utenti di cercare al suo interno gli oggetti selezionati. Inoltre ora si ha la possibilità di selezionare una sola entità, deselezionarla, adattare la vista all'entità e evidenziarla nella vista ad albero.

Ampliamento del supporto delle unità

Il nuovo sistema di unità di misura di FreeCAD, introdotto con la versione 0.14, ora è utilizzato da quasi tutti i moduli, compresi Sketcher, Draft e Arch. Solo poche aree non ne fanno ancora uso, ma, in generale, ora si può contare sul supporto delle unità di misura in tutto il flusso di lavoro.

Altre migliorie

  • Ora Importa/Exporta dispone di una propria tabella nella sezione in Modifica > Preferenze. Tutti i formati di file sono raggruppati nella propria scheda per agevolare la definizione delle opzioni.
  • Le scorciatoie da tastiera personalizzate ora accettano combinazioni fino a 4 tasti.
  • Ora FreeCAD supporta VR Occulus Rift device.
  • Supporto di barre degli strumenti personalizzate globali: Oltre ad aggiungere delle barre degli strumenti personalizzate con i propri strumenti per ogni ambiente di lavoro, ora è anche possibile aggiungere barre degli strumenti personalizzate che rimangono presenti in tutti gli ambienti.
  • Nuovo Lib Pack per Windows, con l'ultima versione di OCE 0.17

Ambiente Part

  • Sono stati aggiunti alcuni nuovi elementi geometrici: Parabola, Arco di parabola, Iperbole e Arco di iperbole

Ambienti Part Design e Sketcher

Ellissi

Ora Sketcher possiede un adeguato supporto per le ellissi. Esse possono essere costruite in vari modi, e possono essere utilizzate per qualsiasi tipo di operazione successiva.

Strumenti di selezione avanzati

In Sketcher è stata implementata una serie di nuovi strumenti per facilitare la diagnosi, ottimizzare o risolvere i problemi negli schizzi. Ora è possibile, ad esempio, selezionare facilmente gli elementi associati a un vincolo, o selezionare il vincolo associato ad un elemento, oppure trovare i vincoli in conflitto o ridondanti.

All'interfaccia utente di Sketcher sono stati aggiunti alcuni nuovi pannelli, e ora è visibile un elenco selezionabile degli elementi dello schizzo.

Unire schizzi

Ora è possibile unire diversi schizzi in uno solo cliccando semplicemente su un pulsante.

Maggiori proprietà di schizzo

La vista delle proprietà degli oggetti di schizzo è stata migliorata, e i vincoli denominati Dati (distanza, distanza orizzontale, distanza verticale) ora appaiono all'interno del disegno e sono modificabili direttamente nelle proprietà Vista dello schizzo, senza dover entrare in modalità di modifica.

Altre migliorie minori

  • Sono stati aggiunti diversi poligoni regolari a schizzo
  • Sono stati aggiunti dei nuovi vincoli: il vincolo Simmetria perpendicolare agli assi di simmetria


Ambiente Spreadsheet

L'ambiente Spreadsheet è stato completamente ricodificato. Ora FreeCAD possiede un editor di fogli di calcolo come si deve, robusto e ricco di funzionalità. Un paio di funzionalità presenti nella versione precedente di questo ambiente sono state rimosse, come ad esempio il controller di proprietà, ma questo è un problema complesso che richiede altro tempo per progettarlo correttamente. Al momento, tuttavia, il nuovo foglio di calcolo offre già delle possibilità di gran lunga migliori delle precenti per raccogliere i dati dal modello.

Ambiente Draft

Consente di incollare i caratteri in ShapeString

Per i nostalgici del vecchio software CAD, ora con lo strumento Forma da testo si possono utilizzare i font adesivi (in cui le lettere sono fatte di linee semplici, non forme piene).

Altre migliorie minori

Drawing Workbench

Export drawing pages to DXF

The system used to export Drawing pages to DXF until now used a very complicated hack to convert the SVG code to FreeCAD object then back to DXF with the Draft exporters. Now, the export is done internally inside the Drawing module, which gives much faster and reliable results. DXF export now uses a template system similar to SVG sheets. If your Drawing page uses a certain SVG template, and a DXF template with the same name is found at the same location, it is used to generate the DXF file.

In the DXF file, the different views are placed as scaled blocks. This allows to quickly restore the 1:1 scale.

Minor improvements

  • It is now possible to reuse projection settings from an existing view when creating new draft views.

Arch Workbench

Updated IFC importer/exporter

FreeCAD's IFC importer has received a lot of work and testing, and a massive upgrade. The old, python-based importer, has been disabled (it is still usable from the python console, though), and FreeCAD now uses exclusively and intensively the newest, bleeding-edge version 5 (read more about it) of IfcOpenShell that is now available on all main platforms (be sure to download the version that matches the python version used by your FreeCAD installation). We now benefit from a much faster and reliable import and export, a much simpler and cleaner code (read: easier to extend), and already a few additional goodies, such as better support for curve-based objects and IFC properties.

New feature: Cut object with plane

This new functionality makes it possible to cut an object according to a plan defines by the face of another object. It is possible to cut the object behind or in front of the plan chooses.

New roof tool

The Roof tool was completely remade and now makes it possible to define slopes different for each sides from roof, moreover it is possible to define a thickness of roof, the length of the overflow.

Panels

A new Panel object has been added to the Arch Workbench. It allows to create all kinds of panel-like objects, and will be specially useful for panel constructions such as the wikihouse or popup house projects.

Furniture

The new Arch Equipment object is designed to add all kinds of non-structural standalone objects to your architectural projects, such as lighting appliances, sanitary equipments or furniture.

Minor enhancements

  • The Basepoint of Arch Frame object can now be set to a specific vertex of the profile.

External modules

There has also been some very interesting work on new workbenches and macros, that are not integrated into the FreeCAD source code (yet!), but are easy to install on an existing FreeCAD 0.15 installation. Instructions are provided on the pages linked below:

Assembly2

The Assembly 2 workbench provides tools to create multi-part assemblies, and is a very good alternative for the official Assembly workbench which is still under development (see forum thread).

Drawing Dimensioning

The Drawing dimensioning workbench adds powerful dimensioning and annotation tools to the Drawing workbench (see forum thread).

Work Features

The WorkFeature macro adds a wide range of helper objects such as alignment planes or axes, and tools to help you to position and align objects along those helper objects (see forum thread).