Pyramids and polyhedrons Workbench/de: Difference between revisions

From FreeCAD Documentation
(Created page with "== Beschreibung ==")
(Created page with "Dieser Arbeitsbereich erstellt: * Parametrische Pyramiden * Parametrische Polyeder: Tetraeder, Hexaeder, Oktaeder, Dodekaeder, Ikosaeder, Ikosaeder_abgestumpft * Geodätische...")
Line 8: Line 8:
== Beschreibung ==
== Beschreibung ==


Dieser Arbeitsbereich erstellt:
This workbench creates:
* Parametrische Pyramiden
* Parametric pyramids
* Parametrische Polyeder: Tetraeder, Hexaeder, Oktaeder, Dodekaeder, Ikosaeder, Ikosaeder_abgestumpft
* Parametric polyhedrons: tetrahedron, hexahedron, octahedron, dodecahedron, icosahedron, icosahedron_truncated
* Geodesic spheres (with divisions 1 to 10)
* Geodätische Kugeln (mit den Unterteilungen 1 bis 10)


Parameters like radius and side, ...can be adjusted just like with normal parts
Parameters like radius and side, ...can be adjusted just like with normal parts

Revision as of 19:59, 6 February 2020

Other languages:


Beschreibung

Dieser Arbeitsbereich erstellt:

  • Parametrische Pyramiden
  • Parametrische Polyeder: Tetraeder, Hexaeder, Oktaeder, Dodekaeder, Ikosaeder, Ikosaeder_abgestumpft
  • Geodätische Kugeln (mit den Unterteilungen 1 bis 10)

Parameters like radius and side, ...can be adjusted just like with normal parts

Installation

To install the Addon use the FreeCAD Addon manager to seamlessly download the Pyramids and polygons workbench.

Usage

  • Once installed, open workbench Polygons
  • Click on a part of your choice and adjust the parameters to your preferences.

Further details about this workbench can be found on the dedicated GitHub repo: https://github.com/eddyverl/FreeCad-Pyramids-and-Polyhedrons

Discussion

Please direct your feedback, ideas, thoughts about this workbench to the dedicated FreeCAD forum thread (link). Bugs can also be submitted to the GitHub repo issue queue.