Part Torus/ru: Difference between revisions

From FreeCAD Documentation
(Created page with "Part Torus")
 
(Created page with "{{GuiCommand/ru|Name=Part Torus|Name/ru=Part Torus|MenuLocation=Part → Torus||Workbenches=Part, Complete|SeeAlso=[[Part_CreatePrimitives/ru|Part CreatePri...")
Line 1: Line 1:
{{GuiCommand|Name=Part Torus|MenuLocation=Part → Torus||Workbenches=[[Part Module|Part]], Complete|SeeAlso=[[Part_CreatePrimitives|Part CreatePrimitives]]}}
{{GuiCommand/ru|Name=Part Torus|Name/ru=Part Torus|MenuLocation=Part → Torus||Workbenches=[[Part Module/ru|Part]], Complete|SeeAlso=[[Part_CreatePrimitives/ru|Part CreatePrimitives]]}}


Creates a simple parametric torus, with position, angle1, angle2, angle3, radius1 and radius2 parameters. The torus will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of torus instead of a full one (they are set to 360° by default), the radius 1 and 2 define respectively the size of the hole and the ring thickness of the torus.
Creates a simple parametric torus, with position, angle1, angle2, angle3, radius1 and radius2 parameters. The torus will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of torus instead of a full one (they are set to 360° by default), the radius 1 and 2 define respectively the size of the hole and the ring thickness of the torus.

Revision as of 22:10, 10 July 2014

Part Torus

Системное название
Part Torus
Расположение в меню
Part → Torus
Верстаки
Part, Complete
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Part CreatePrimitives

Creates a simple parametric torus, with position, angle1, angle2, angle3, radius1 and radius2 parameters. The torus will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of torus instead of a full one (they are set to 360° by default), the radius 1 and 2 define respectively the size of the hole and the ring thickness of the torus.