Part Torus/en: Difference between revisions

From FreeCAD Documentation
(Neue Version von externer Quelle importiert)
 
(Importation d’une nouvelle version depuis une source externe.)
Line 1: Line 1:
{{GuiCommand|Name=Part_Torus|MenuLocation=Part -> Torus||Workbenches=[[Part_Module|Part_Module]],Complete|SeeAlso=[[Part_CreatePrimitives|Part_CreatePrimitives]]}}
{{GuiCommand|Name=Part Torus|MenuLocation=Part Torus||Workbenches=[[Part Module|Part]], Complete|SeeAlso=[[Part_CreatePrimitives|Part CreatePrimitives]]}}


Creates a simple parametric torus, with position, angle1, angle2, angle3, radius1 and radius2 parameters. The torus will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of torus instead of a full one (they are set to 360° by default), the radius 1 and 2 define respectively the size of the hole and the ring thickness of the torus.
Creates a simple parametric torus, with position, angle1, angle2, angle3, radius1 and radius2 parameters. The torus will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of torus instead of a full one (they are set to 360° by default), the radius 1 and 2 define respectively the size of the hole and the ring thickness of the torus.

Revision as of 10:21, 19 June 2014

Part Torus

Menu location
Part → Torus
Workbenches
Part, Complete
Default shortcut
None
Introduced in version
-
See also
Part CreatePrimitives

Creates a simple parametric torus, with position, angle1, angle2, angle3, radius1 and radius2 parameters. The torus will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of torus instead of a full one (they are set to 360° by default), the radius 1 and 2 define respectively the size of the hole and the ring thickness of the torus.