Part Ellipse/es: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 5: Line 5:
An Ellipse geometric primitive is available from the Create Primitives dialogue in the Part workbench.
An Ellipse geometric primitive is available from the Create Primitives dialogue in the Part workbench.


The Create Primitives dialogue can be accessed via the [[Part_CreatePrimitives|CreatePrimitives]] icon [[Image:Part_CreatePrimitives.png|32px]] located in the Part menu or the Part toolbar, in the Part Workbench.
The Create Primitives dialogue can be accessed via the [[Part_CreatePrimitives|CreatePrimitives]] icon [[Image:Part_CreatePrimitives.svg|32px]] located in the Part menu or the Part toolbar, in the Part Workbench.


This command will create a elliptical curved edge. With the default values, the elliptical curved edge will be closed and therefore will be an ellipse. If the properties Angle 1 or Angle 2 are changed from their default values (0 and 360) the edge will be an open curve.
This command will create a elliptical curved edge. With the default values, the elliptical curved edge will be closed and therefore will be an ellipse. If the properties Angle 1 or Angle 2 are changed from their default values (0 and 360) the edge will be an open curve.

Revision as of 21:23, 14 February 2020

Part Ellipse

Ubicación en el Menú
Part → Create Primitives → Ellipse
Entornos de trabajo
Part, OpenSCAD
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
..

Description

An Ellipse geometric primitive is available from the Create Primitives dialogue in the Part workbench.

The Create Primitives dialogue can be accessed via the CreatePrimitives icon File:Part CreatePrimitives.svg located in the Part menu or the Part toolbar, in the Part Workbench.

This command will create a elliptical curved edge. With the default values, the elliptical curved edge will be closed and therefore will be an ellipse. If the properties Angle 1 or Angle 2 are changed from their default values (0 and 360) the edge will be an open curve.

Properties

  • Major radius: the major radius of the ellipse, the default value is 4
  • Minor radius: the minor radius of the ellipse, the default value is 2
  • Angle 1: start of the edge of the ellipse or elliptical curved edge, (degrees anti-clockwise), the default value is 0
  • Angle 2: end of the edge of the ellipse or elliptical curved edge, (degrees anti-clockwise), the default value is 360