Part Cone/ru: Difference between revisions
Renatorivo (talk | contribs) (Created page with "{{GuiCommand/ru|Name=Part Cone|Name/ru=Part Cone|MenuLocation=Part -> Cone||Workbenches=Part, Complete|SeeAlso=[[Part_CreatePrimitives/ru|Part CreatePrimiti...") |
(Updating to match new version of source page) |
||
Line 18: | Line 18: | ||
*Height - the height of the Part Cone |
*Height - the height of the Part Cone |
||
*Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii. |
*Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii. |
||
|} |
|} |
||
Revision as of 20:31, 12 September 2014
Part Cone |
Системное название |
---|
Part Cone |
Расположение в меню |
Part -> Cone |
Верстаки |
Part, Complete |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
Part CreatePrimitives |
Description
A parametric truncated Part Cone primitive is available in the Part workbench from the Part tool bar, Part menu (primitives sub-menu) and the Create Primitives dialogue.
How to use
In the workbench Part click on the cone icon .
The default values create a truncated parametric cone, defined by radius1, radius2 height and angle, parameters. The default cone will be positioned at origin (point 0,0,0) on creation. The angle parameter permits the creation of a portion of cone (it is set to 360° by default), and the radius 1 and 2 correspond to base and top radius of the truncated cone.
Options
The image below shows a Part Cone with the parameter "Angle" set to 270 degrees and all other parameters are at their default values.