Part: Cerc
Part Circle |
Menu location |
---|
Part → Create Primitives → Circle |
Workbenches |
Part, OpenSCAD |
Default shortcut |
None |
Introduced in version |
- |
See also |
.. |
Descriere
Un element primitiv geometric este Circle care este disponibil din dialogul Create Primitives în Atelierul de lucru Part.
The Create Primitives dialogue can be accessed via the CreatePrimitives icon located in the Part menu or the Part toolbar, in the Part Workbench.
This command will create a circular curved edge. With the default values, the circular curved edge will be closed and therefore will be a circle. If the properties Angle 0 or Angle 1 are changed from their default values (0 and 360) the edge will be an open curve, an arc.
Alternatively a Part Circle can be initially defined from three points. Once created the circle will only contain the standard Part Circle properties and will no longer contain a reference to the creation points.
Properties
- Radius: the radius of the curved edge (arc or circle)
- Angle 0: start of the curved edge, (degrees anti-clockwise), the default value is 0
- Angle 1: end of the curved edge, (degrees anti-clockwise), the default value is 360