PartDesign tutorial/de: Difference between revisions
Wurstwasser (talk | contribs) (Created page with "Dieses Tutorial setzt die Arbeit mit der zuvor im Sketcher Tutorial erstellten Skizze fort.") |
Wurstwasser (talk | contribs) (Created page with "=== Voraussetzungen === * FreeCAD Version 0.16 oder neuer * Das Leser hat das Sketcher Tutorial bereits absolviert") |
||
Line 16: | Line 16: | ||
[[Image:PartDesign_tutorial_result.png|480px]] |
[[Image:PartDesign_tutorial_result.png|480px]] |
||
=== |
=== Voraussetzungen === |
||
* FreeCAD |
* FreeCAD Version 0.16 oder neuer |
||
* |
* Das Leser hat das [[Sketcher tutorial/de|Sketcher Tutorial]] bereits absolviert |
||
=== Procedure === |
=== Procedure === |
Revision as of 20:37, 5 February 2016
Tutorial |
Topic |
---|
{{{Topic}}} |
Level |
Anfänger |
Time to complete |
15 Minuten |
Authors |
Drei |
FreeCAD version |
0.16 oder neuer |
Example files |
See also |
None |
Einleitung
Dieses Tutorial soll den Leser in die Grundlagen des Arbeitsbereichs PartDesign einführen.
Dieses Tutorial setzt die Arbeit mit der zuvor im Sketcher Tutorial erstellten Skizze fort.
File:PartDesign tutorial result.png
Voraussetzungen
- FreeCAD Version 0.16 oder neuer
- Das Leser hat das Sketcher Tutorial bereits absolviert
Procedure
Creating 3D geometry
The purpose of the PartDesign Workbench is to allow the user to create geometry in 3D space to fulfill a certain need. AS such, it is equipped with tools to make use of sketches and convert them to 3D objects.
There are two basic features to achieve this: Pad and Revolution. Alongside their substractive counterparts ( Pocket and Groove) they make up most of the common actions used by this workbench.
- Switch to the PartDesign Workbench
- Select the sketch that was created in the Sketcher tutorial
- Select Pad
- Set the distance to 5 mm
- Select Ok
Another way to create 3D geometry is with the Revolution tool.
- Create a sketch based on the image above
- Select Revolution
- Set the angle to 360°
Subtracting Features
We'll begin by creating a sketch with the shape we want to subtract.
- Select the top face of the Pad
- Select New sketch
- Select External Geometry
- Approach the edge of the pad. An arc should be highlighted
- Select the arc. An arc of a different color should appear in the sketch
- Create a circe centered on the same point as the arc and set its radius to 5 mm radius
Afterwards, we'll proceed to apply a Pocket feature.
- Select the sketch
- Select Pocket
- Set the distance to Through all
Pattern Features
We are now finished with the basic workflow for the Sketcher Module.