PartDesign SubtractiveSphere/ro: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 9: Line 9:


[[File:PartDesign_SubtractiveSphere_example.svg|none]]
[[File:PartDesign_SubtractiveSphere_example.svg|none]]
''On the left: active body (A) shown in grey and subtractive sphere (B) shown in transparent red; result on the right.''
''În partea stângă: corpul activ (A) afișat în gri și sfera substractivă (B) arătată în roșu transparent; rezultatul în partea dreaptă.''


== Cum se folosește ==
== Cum se folosește ==

Revision as of 17:08, 29 September 2018

PartDesign SubtractiveSphere

Menu location
Part Design → Create a subtractive primitive → Subtractive Sphere
Workbenches
PartDesign
Default shortcut
None
Introduced in version
-
See also
PartDesign CompPrimitiveSubtractive

Descriere

Inserează o sferă substractivă în Corpul activ. forma sa este scăzută din solidul existent.

introduced in version 0.17

În partea stângă: corpul activ (A) afișat în gri și sfera substractivă (B) arătată în roșu transparent; rezultatul în partea dreaptă.

Cum se folosește

  1. Apăsați butonul Subtractive Sphere . Notă: Sfera Substractivă este partea meniului de iconițe numit Create an additive primitive. După lansarea FreeCAD, și Cubul Substractiv apare în bara de sintrumetne. Pentru a ajunge la Sferă click pe săgeata în dincolo de iconițele vizibile și selectați Subtractive Sphere din menu.
  2. Definiți parametrii Primitivei și Attachment.
  3. Click OK.
  4. O funcționalitate sferă apare sub Corpul activ

Opţiuni

The Sphere can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Proprietăți

  • DateAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
  • DateLabel: Label given to the Sphere object. Change to suit your needs.
  • DateRadius: Radius of the sphere.
  • DateAngle1: (labelled V parameter in the Primitive parameters) lower truncation of the sphere, parallel to the circular cross section (-90 degrees in a full sphere)
  • DateAngle2: (unlabelled in the Primitive parameters) upper truncation of the ellipsoid, parallel to the circular cross section (90 degrees in a full sphere).
  • DateAngle3: (labelled U parameter in the Primitive parameters) angle of rotation of the cross section (360 degrees in a full sphere).