PartDesign: Mansardare Subtractivă

From FreeCAD Documentation
Revision as of 18:13, 29 September 2018 by Luc (talk | contribs)

PartDesign SubtractiveLoft

Menu location
Part Design → Subtractive loft
Workbenches
PartDesign
Default shortcut
None
Introduced in version
-
See also
Additive loft, Subtractive pipe

Descriere

Subtractive Loft creează un solid substractiv în Corpul activ făcând o tranziție lisă între două sau mai multe schițe (denumite și secțiuni transversale). Forma sa este scăzută din solidul existent.

introduced in version 0.17

Cum se folosește

  1. Press the Subtractive loft button.
  2. In the Select feature dialog, select a sketch to be used as first cross-section and click OK.
    • Alternatively, a single sketch can be selected prior to pressing the Subtractive loft button.
  3. In the Loft parameters, press the Add Section button.
  4. Select a sketch in the 3D view. Repeat to select more sketches.
  5. Set options if needed and click OK.

Opţiuni

  • Ruled surface: face tranziții drepte între secțiuni transversale. Dos nu se aplică la o mansardă cu două secțiuni transversale. Dacă nu este bifată, tranzițiile vor fi netede.
  • Closed:face o tranziție de la ultima secțiune transversală la prima, creând o buclă.
  • Apăsați butonul Remove Section pentru a șterge o shiță, prin selctarea ei într-o vizualizarea 3D.

Proprietăți

  • DateLabel: name given to the operation, this name can be changed at convenience.
  • DateSections: lists the sections used.
  • DateRuled: see Options.
  • DateClosed: see Options.
  • DateMidplane: N/A
  • DateReversed: N/A
  • DateRefine: true or false. If set to true, cleans the solid from residual edges left by features. See Part RefineShape for more details.

Limite

  • Sketches must form closed profiles.
  • It is not possible to loft to a vertex.
  • A cross-section cannot lie on the same plane as the one immediately preceding it.
  • To better control the shape of the loft, it is recommended that all the cross-sections have the same number of segments. For example, for a loft between a rectangle and a circle, the circle may be broken down into 4 connected arcs.

Legături