PartDesign SubtractiveLoft/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "PartDesign SubtractiveLoft")
 
(Created page with "==Descriere==")
Line 2: Line 2:
{{GuiCommand|Name=PartDesign SubtractiveLoft|Workbenches=[[PartDesign Workbench|PartDesign]]|MenuLocation=Part Design → Subtractive loft|Shortcut=None|SeeAlso=[[PartDesign AdditiveLoft|Additive loft]], [[PartDesign SubtractivePipe|Subtractive pipe]]}}
{{GuiCommand|Name=PartDesign SubtractiveLoft|Workbenches=[[PartDesign Workbench|PartDesign]]|MenuLocation=Part Design → Subtractive loft|Shortcut=None|SeeAlso=[[PartDesign AdditiveLoft|Additive loft]], [[PartDesign SubtractivePipe|Subtractive pipe]]}}


==Description==
==Descriere==


'''Subtractive Loft''' creates a subtractive solid in the active Body by making a transition between two or more sketches (also referred to as cross-sections). Its shape is then subtracted from the existing solid.
'''Subtractive Loft''' creates a subtractive solid in the active Body by making a transition between two or more sketches (also referred to as cross-sections). Its shape is then subtracted from the existing solid.

Revision as of 18:04, 29 September 2018

PartDesign SubtractiveLoft

Menu location
Part Design → Subtractive loft
Workbenches
PartDesign
Default shortcut
None
Introduced in version
-
See also
Additive loft, Subtractive pipe

Descriere

Subtractive Loft creates a subtractive solid in the active Body by making a transition between two or more sketches (also referred to as cross-sections). Its shape is then subtracted from the existing solid.

introduced in version 0.17

How to use

  1. Press the Subtractive loft button.
  2. In the Select feature dialog, select a sketch to be used as first cross-section and click OK.
    • Alternatively, a single sketch can be selected prior to pressing the Subtractive loft button.
  3. In the Loft parameters, press the Add Section button.
  4. Select a sketch in the 3D view. Repeat to select more sketches.
  5. Set options if needed and click OK.

Options

  • Ruled surface: makes straight transitions between cross-sections. Dos not apply to a loft with two cross-sections. If not checked, transitions will be smooth.
  • Closed: makes a transition from the last cross-section to the first, creating a loop.
  • Press the Remove Section button to remove a sketch, by selecting it in the 3D view.

Properties

  • DateLabel: name given to the operation, this name can be changed at convenience.
  • DateSections: lists the sections used.
  • DateRuled: see Options.
  • DateClosed: see Options.
  • DateMidplane: N/A
  • DateReversed: N/A
  • DateRefine: true or false. If set to true, cleans the solid from residual edges left by features. See Part RefineShape for more details.

Limitations

  • Sketches must form closed profiles.
  • It is not possible to loft to a vertex.
  • A cross-section cannot lie on the same plane as the one immediately preceding it.
  • To better control the shape of the loft, it is recommended that all the cross-sections have the same number of segments. For example, for a loft between a rectangle and a circle, the circle may be broken down into 4 connected arcs.

Links