PartDesign SubtractiveCylinder/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "Inserează un cilindru subtractiv în Corpul Activ. Forma sa este extrasă din solidul existent.")
(Created page with "''În partea stângă: corpul activ (A) afișat în gri și cilindrul substractiv (B) afișat în roșu transparent; rezultatul în partea dreaptă.''")
Line 10: Line 10:
[[File:PartDesign_SubtractiveCylinder_example.svg|none]]
[[File:PartDesign_SubtractiveCylinder_example.svg|none]]


''On the left: active body (A) shown in grey and subtractive cylinder (B) shown in transparent red; result on the right.''
''În partea stângă: corpul activ (A) afișat în gri și cilindrul substractiv (B) afișat în roșu transparent; rezultatul în partea dreaptă.''


==How to use==
==How to use==

Revision as of 19:35, 1 November 2018

PartDesign SubtractiveCylinder

Menu location
Part Design → Create a subtractive primitive → Subtractive Cylinder
Workbenches
PartDesign
Default shortcut
None
Introduced in version
-
See also
PartDesign CompPrimitiveSubtractive

Descriere

Inserează un cilindru subtractiv în Corpul Activ. Forma sa este extrasă din solidul existent.

introduced in version 0.17

În partea stângă: corpul activ (A) afișat în gri și cilindrul substractiv (B) afișat în roșu transparent; rezultatul în partea dreaptă.

How to use

  1. Press the Subtractive Cylinder button. Note: the Subtractive Cylinder is part of an icon menu labelled Create an subtractive primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. To get to the Cylinder button, click on the down arrow besides the visible icon and select Subtractive cylinder in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Cylinder feature appears under the active Body.

Options

The Cylinder can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

  • DateAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
  • DateLabel: label given to the Cylinder object. Change to suit your needs.
  • DateRadius: the radius value of the cylinder.
  • DateAngle: angle of rotation of the cross section (360 degrees forms a full cylinder).
  • DateHeight: the length of the cylinder along its axis.