PartDesign Point/it: Difference between revisions

From FreeCAD Documentation
(Created page with "{{GuiCommand/it|Name=PartDesign Point|Name/it=Punto di riferimento|Workbenches=PartDesign|MenuLocation=Part Design → Punto di riferimento|Shortcu...")
(Created page with "==Descrizione==")
Line 1: Line 1:
{{GuiCommand/it|Name=PartDesign Point|Name/it=Punto di riferimento|Workbenches=[[PartDesign Workbench/it|PartDesign]]|MenuLocation=Part Design → Punto di riferimento|Shortcut=None|SeeAlso=[[PartDesign Line/it|Linea di riferimento]], [[PartDesign Plane/it|Piano di riferimento]]}}
{{GuiCommand/it|Name=PartDesign Point|Name/it=Punto di riferimento|Workbenches=[[PartDesign Workbench/it|PartDesign]]|MenuLocation=Part Design → Punto di riferimento|Shortcut=None|SeeAlso=[[PartDesign Line/it|Linea di riferimento]], [[PartDesign Plane/it|Piano di riferimento]]}}


==Description==
==Descrizione==


Creates a '''datum point''' which can be used as reference for sketches or other datum geometry.
Creates a '''datum point''' which can be used as reference for sketches or other datum geometry.

Revision as of 20:51, 25 February 2018

Punto di riferimento

Posizione nel menu
Part Design → Punto di riferimento
Ambiente
PartDesign
Avvio veloce
None
Introdotto nella versione
-
Vedere anche
Linea di riferimento, Piano di riferimento

Descrizione

Creates a datum point which can be used as reference for sketches or other datum geometry.

introduced in version 0.17

A datum point attached to a sphere with an attachment offset in Z = 2


How to use

  1. Press the Create a datum point button.
  2. Define Point parameters. Select a first reference in the 3D view to filter the available attachment modes.
  3. Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
  4. To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
  5. Select an attachment mode in the list.
  6. Define Attachment Offset values.
  7. Press OK.

Options

Double-click the DatumPoint label in the Model tree or right-click and select Edit datum in the contextual menu to edit its parameters. For more details about Attachment mode and Attachment offset, see Attachment.

Properties

  • DatiMapMode: lists the attachment mode used.
  • DatiAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
  • DatiLabel: name given to the object, this name can be changed at convenience.

Limitations

  • The datum point cannot be used as section for Pipe and Loft features.