PartDesign: Planul

From FreeCAD Documentation
Revision as of 02:26, 29 October 2018 by Normandc (talk | contribs)

PartDesign Plane

poziția meniului
PartDesign → Create a datum plane
Ateliere
PartDesign
scurtătură
None
Prezentat în versiune
0.17
A se vedea, de asemenea,
PartDesign Point/ro, PartDesign Line/ro

Descriere

Creați un plan de referință datum plane care poate fi folosit ca referință pentru schițe sau alte forme geometrice de referințe. Schițele pot fi atașate la planele de referință .

introduced in version 0.17

"Planul de referință care traversează cele trei colțuri ale cubului cu partea de sus a unui Cilindru folosind planul de referință X-Y".

Cum se folosește

  1. Press the Create a datum plane button.
  2. Define Plane parameters. Select a first reference in the 3D view to filter the available attachment modes.
  3. Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
  4. To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
  5. Select an attachment mode in the list.
  6. Define Attachment Offset values.
  7. Press OK.

Opţiuni

Double-click the DatumPlane label in the Model tree or right-click and select Edit datum in the contextual menu to edit its parameters. For more details about Attachment mode and Attachment offset, see Attachment.

Proprietăți

  • DateMapMode: lists the attachment mode used.
  • DateAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
  • DateLabel: name given to the object, this name can be changed at convenience.