PartDesign: Nuovo schizzo

From FreeCAD Documentation
Revision as of 22:23, 12 December 2018 by Renatorivo (talk | contribs)

Nuovo schizzo

Posizione nel menu
PartDesign → Crea schizzo
Ambiente
PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
0.17
Vedere anche
Nessuno

Descrizione

Questo strumento crea un nuovo schizzo, crea un nuovo Corpo per contenere lo schizzo se non esiste e apre automaticamente l'ambiente Sketcher dopo la creazione.

Quando si creano modelli usando PartDesign, questo strumento deve essere preferito allo strumento Nuovo schizzo che si trova nell'ambiente Sketcher.

Uso

  1. Cliccare su nella barra degli strumenti, o scegliere PartDesign Crea schizzo dal menu principle.

Opzioni

  • To change the attachment of an existing sketch, change its Map Mode property (see Properties.)

Properties

  • DatiMap Mode: mode of attachment of the sketch to another object, usually a plane or a face but can be other types of objects. Click once in the field to reveal a ... button and press it to open the Attachment dialog. If set to Deactivated, the Placement property is enabled.
  • DatiPlacement: controls the orientation of the sketch in the 3D space; see placement. Disabled if the sketch is attached through the Map Mode property.