PartDesign Line: Difference between revisions

From FreeCAD Documentation
(Prepare for translation.)
(Marked this version for translation)
Line 1: Line 1:
<translate>
<translate>
<!--T:1-->
{{GuiCommand|Name=PartDesign Line|Workbenches=[[PartDesign Workbench|PartDesign]]|MenuLocation=Part Design → Create a datum line|Shortcut=None|SeeAlso=}}
{{GuiCommand|Name=PartDesign Line|Workbenches=[[PartDesign Workbench|PartDesign]]|MenuLocation=Part Design → Create a datum line|Shortcut=None|SeeAlso=}}


==Description==
==Description== <!--T:2-->


<!--T:3-->
Creates a '''datum line''' which can be used as reference for sketches, other datum geometry or features. For example it can be used as revolution axis for Revolution and Groove features.
Creates a '''datum line''' which can be used as reference for sketches, other datum geometry or features. For example it can be used as revolution axis for Revolution and Groove features.


<!--T:4-->
{{Version|0.17}}
{{Version|0.17}}


==How to use==
==How to use== <!--T:5-->


<!--T:6-->
# Press the {{KEY|[[Image:PartDesign Line.png|24px]] '''Create a datum line'''}} button.
# Press the {{KEY|[[Image:PartDesign Line.png|24px]] '''Create a datum line'''}} button.
# Define Line parameters. Select a first reference in the 3D view to filter the available attachment modes.
# Define Line parameters. Select a first reference in the 3D view to filter the available attachment modes.
Line 18: Line 22:
# Press {{KEY|OK}}.
# Press {{KEY|OK}}.


==Options==
==Options== <!--T:7-->


<!--T:8-->
For more details about Attachment mode and Attachment offset, see [[Part Attachment|Attachment]].
For more details about Attachment mode and Attachment offset, see [[Part Attachment|Attachment]].


==Properties==
==Properties== <!--T:9-->


<!--T:10-->
* {{PropertyData|MapMode}}: lists the attachment mode used.
* {{PropertyData|MapMode}}: lists the attachment mode used.
* {{PropertyData|Attachment Offset}}: applies a transformation (translation and rotation) in reference to the attachment placement.
* {{PropertyData|Attachment Offset}}: applies a transformation (translation and rotation) in reference to the attachment placement.

Revision as of 16:13, 25 February 2018

PartDesign Line

Menu location
Part Design → Create a datum line
Workbenches
PartDesign
Default shortcut
None
Introduced in version
-
See also
None

Description

Creates a datum line which can be used as reference for sketches, other datum geometry or features. For example it can be used as revolution axis for Revolution and Groove features.

introduced in version 0.17

How to use

  1. Press the Create a datum line button.
  2. Define Line parameters. Select a first reference in the 3D view to filter the available attachment modes.
  3. Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
  4. To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
  5. Select an attachment mode in the list.
  6. Define Attachment Offset values.
  7. Press OK.

Options

For more details about Attachment mode and Attachment offset, see Attachment.

Properties

  • DataMapMode: lists the attachment mode used.
  • DataAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
  • DataLabel: name given to the object, this name can be changed at convenience.