PartDesign Chamfer: Difference between revisions
(removed extraneous list items) |
|||
Line 24: | Line 24: | ||
=== PartDesign Chamfer VS. Part Chamfer === |
=== PartDesign Chamfer VS. Part Chamfer === |
||
'''The PartDesign Chamfer is not to be confused with its [[Part Chamfer|Part workbench counterpart]]'''. Although they share the same icon, they are not the same, and are not used the same way. |
|||
* |
|||
Here is how they differ from each other: |
|||
* |
|||
* Edges must be selected on an object before activating the PartDesign Chamfer. With the Part Chamfer, the tool can be started, then a solid is selected, then edges. |
|||
* |
|||
* The PartDesign Chamfer creates a separate Fillet entry (followed by a sequential number if there are already existing fillets) in the Project tree for the current body. The Part Chamfer becomes the parent of the object it was applied to. |
|||
|} |
|||
* The PartDesign Chamfer offers a live preview of the fillet applied to the object before validating the function. |
|||
{{clear}} |
|||
Revision as of 06:25, 26 December 2018
PartDesign Chamfer |
Menu location |
---|
Part Design → Chamfer |
Workbenches |
PartDesign, Complete |
Default shortcut |
None |
Introduced in version |
- |
See also |
Chamfer Part |
Description
This tool creates chamfers (flat face at 45 degrees to both adjoining faces) on the selected edges of an object. A new separate Chamfer entry (followed by a sequential number if there are already existing fillets in the document) is created in the Project tree.
Usage
PartDesign Chamfer VS. Part ChamferThe PartDesign Chamfer is not to be confused with its Part workbench counterpart. Although they share the same icon, they are not the same, and are not used the same way. Here is how they differ from each other:
|