PartDesign AdditiveCone/it: Difference between revisions

From FreeCAD Documentation
(Created page with "Inserisce un cono primitivo nel corpo attivo come prima caratteristica o lo fonde con le caratteristiche esistenti.")
(Created page with "{{Version/it|0.17}}")
Line 6: Line 6:
Inserisce un cono primitivo nel corpo attivo come prima caratteristica o lo fonde con le caratteristiche esistenti.
Inserisce un cono primitivo nel corpo attivo come prima caratteristica o lo fonde con le caratteristiche esistenti.


{{Version|0.17}}
{{Version/it|0.17}}


[[File:PartDesign_AdditiveCone_example.png|200px]]
[[File:PartDesign_AdditiveCone_example.png|200px]]

Revision as of 20:41, 7 February 2018

Cono additivo

Posizione nel menu
Part Design → Crea una primitiva additiva → Cono
Ambiente
PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Primitive additive

Descrizione

Inserisce un cono primitivo nel corpo attivo come prima caratteristica o lo fonde con le caratteristiche esistenti.

disponibile dalla versione 0.17

How to use

  1. Press the Additive Cone button. Note: the Additive Cone is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. To get to the Cone button, click on the down arrow besides the visible icon and select Additive Cone in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Cone feature appears under the active Body.

Options

The Cone can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

  • DatiAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
  • DatiLabel: label given to the Cone object. Change to suit your needs.
  • DatiRadius1: the radius value at the cone's base.
  • DatiRadius2: the radius value at the cone's top. A non-zero value creates a truncated cone.
  • DatiHeight: the height of the cone along its axis.
  • DatiAngle: angle of rotation of the cross section (360 degrees in a full cone).