Macro Rotate View: Difference between revisions
(Restore the version value as before) |
m (→) |
||
Line 55: | Line 55: | ||
==Use== <!--T:4--> |
==Use== <!--T:4--> |
||
Paste the code in the Python console FreeCAD and type {{KEY|Enter}} |
Paste the code in the Python console FreeCAD and type {{KEY|Enter}} → {{KEY|Enter}} |
||
==Script== <!--T:5--> |
==Script== <!--T:5--> |
Revision as of 17:55, 10 December 2018
Description |
---|
This macro rotates the current view by 90° to the left. Only works if you are in Top view Macro version: 01.00 Last modified: 2010-11-17 Author: Yorik |
Author |
Yorik |
Download |
None |
Links |
Macros recipes How to install macros How to customize toolbars |
Macro Version |
01.00 |
Date last modified |
2010-11-17 |
FreeCAD Version(s) |
None |
Default shortcut |
None |
See also |
None |
Description
This macro rotates the current view by 90° to the left. Only works if you are in Top view
import math
from pivy import coin
cam = Gui.ActiveDocument.ActiveView.getCameraNode()
rot = coin.SbRotation()
rot.setValue(coin.SbVec3f(0,0,1),math.pi/2)
nrot = cam.orientation.getValue() * rot
cam.orientation = nrot
Description
This code for :
For FreeCAD Version 0.16
import math
import pivy
from pivy import coin
Gui.activeDocument().activeView().viewAxonometric()
Gui.SendMsgToActiveView("ViewFit")
cam = Gui.ActiveDocument.ActiveView.getCameraNode()
rot = coin.SbRotation()
rot.setValue(coin.SbVec3f(1,0,0),-math.pi/2) # Y pointing upwards (mode 1)
#rot.setValue(coin.SbVec3f(0,0,1),math.pi/2) # Z pointing upwards (mode 2 uncomment for use)
nrot = cam.orientation.getValue() * rot
cam.orientation = nrot
Gui.SendMsgToActiveView("ViewFit")
Description
This def paste in the Python console FreeCAD (or your macro) allows you to rotate the view in 3-axis and the angle (in degrees) give interesting to create a plan to a desired position
Use
Paste the code in the Python console FreeCAD and type Enter → Enter
Script
def RotateView(axisX=1.0,axisY=0.0,axisZ=0.0,angle=45.0):
import math
from pivy import coin
try:
cam = Gui.ActiveDocument.ActiveView.getCameraNode()
rot = coin.SbRotation()
rot.setValue(coin.SbVec3f(axisX,axisY,axisZ),math.radians(angle))
nrot = cam.orientation.getValue() * rot
cam.orientation = nrot
print axisX," ",axisY," ",axisZ," ",angle
except Exception:
print "Not ActiveView "
tip in the console ex :
RotateView(0,1,0,45)
If there is no open document an error is returned