Fasteners Workbench: Difference between revisions
(Nails and pins.) |
(Marked this version for translation) |
||
Line 168: | Line 168: | ||
* [[Image:Fasteners_DIN7984.svg|32px]] '''DIN 7984''' Hexagon socket head cap screw with low head. |
* [[Image:Fasteners_DIN7984.svg|32px]] '''DIN 7984''' Hexagon socket head cap screw with low head. |
||
<!--T:193--> |
|||
* [[Image:Fasteners_ISO2936.svg|32px]] '''ISO 2936''' Hexagon socket screw key. |
* [[Image:Fasteners_ISO2936.svg|32px]] '''ISO 2936''' Hexagon socket screw key. |
||
Line 204: | Line 205: | ||
=== Slotted head screws === <!--T:129--> |
=== Slotted head screws === <!--T:129--> |
||
<!--T:194--> |
|||
* [[Image:Fasteners_ASMEB18.6.1.2.svg|32px]] '''ASME B18.6.1.2''' Slotted flat countersunk head wood screw. |
* [[Image:Fasteners_ASMEB18.6.1.2.svg|32px]] '''ASME B18.6.1.2''' Slotted flat countersunk head wood screw. |
||
<!--T:195--> |
|||
* [[Image:Fasteners_ASMEB18.6.1.4.svg|32px]] '''ASME B18.6.1.4''' Slotted oval countersunk head wood screw. |
* [[Image:Fasteners_ASMEB18.6.1.4.svg|32px]] '''ASME B18.6.1.4''' Slotted oval countersunk head wood screw. |
||
Line 211: | Line 214: | ||
* [[Image:Fasteners_ASMEB18.6.3.1A.svg|32px]] '''ASME B18.6.3.1A''' UNC slotted countersunk flat head screw. |
* [[Image:Fasteners_ASMEB18.6.3.1A.svg|32px]] '''ASME B18.6.3.1A''' UNC slotted countersunk flat head screw. |
||
<!--T:196--> |
|||
* [[Image:Fasteners_ASMEB18.6.3.4A.svg|32px]] '''ASME B18.6.3.4A''' UNC slotted oval countersunk head screw. |
* [[Image:Fasteners_ASMEB18.6.3.4A.svg|32px]] '''ASME B18.6.3.4A''' UNC slotted oval countersunk head screw. |
||
<!--T:197--> |
|||
* [[Image:Fasteners_ASMEB18.6.3.9A.svg|32px]] '''ASME B18.6.3.9A''' UNC slotted pan head screw. |
* [[Image:Fasteners_ASMEB18.6.3.9A.svg|32px]] '''ASME B18.6.3.9A''' UNC slotted pan head screw. |
||
<!--T:198--> |
|||
* [[Image:Fasteners_ASMEB18.6.3.10A.svg|32px]] '''ASME B18.6.3.10A''' UNC Slotted fillister head screw. |
* [[Image:Fasteners_ASMEB18.6.3.10A.svg|32px]] '''ASME B18.6.3.10A''' UNC Slotted fillister head screw. |
||
<!--T:199--> |
|||
* [[Image:Fasteners_ASMEB18.6.3.12A.svg|32px]] '''ASME B18.6.3.12A''' UNC Slotted truss head screws. |
* [[Image:Fasteners_ASMEB18.6.3.12A.svg|32px]] '''ASME B18.6.3.12A''' UNC Slotted truss head screws. |
||
<!--T:200--> |
|||
* [[Image:Fasteners_ASMEB18.6.3.16A.svg|32px]] '''ASME B18.6.3.16A''' UNC Slotted round head screw. |
* [[Image:Fasteners_ASMEB18.6.3.16A.svg|32px]] '''ASME B18.6.3.16A''' UNC Slotted round head screw. |
||
Line 247: | Line 255: | ||
=== H cross head screws === <!--T:130--> |
=== H cross head screws === <!--T:130--> |
||
<!--T:201--> |
|||
* [[Image:Fasteners_ASMEB18.6.1.3.svg|32px]] '''ASME B18.6.1.3''' Flat countersunk head wood screw. |
* [[Image:Fasteners_ASMEB18.6.1.3.svg|32px]] '''ASME B18.6.1.3''' Flat countersunk head wood screw. |
||
<!--T:202--> |
|||
* [[Image:Fasteners_ASMEB18.6.1.5.svg|32px]] '''ASME B18.6.1.5''' Oval countersunk head wood screw. |
* [[Image:Fasteners_ASMEB18.6.1.5.svg|32px]] '''ASME B18.6.1.5''' Oval countersunk head wood screw. |
||
<!--T:203--> |
|||
* [[Image:Fasteners_ASMEB18.6.3.1B.svg|32px]] '''ASME B18.6.3.1B''' UNC flat countersunk head screw. |
* [[Image:Fasteners_ASMEB18.6.3.1B.svg|32px]] '''ASME B18.6.3.1B''' UNC flat countersunk head screw. |
||
<!--T:204--> |
|||
* [[Image:Fasteners_ASMEB18.6.3.4B.svg|32px]] '''ASME B18.6.3.4B''' UNC oval countersunk head screw. |
* [[Image:Fasteners_ASMEB18.6.3.4B.svg|32px]] '''ASME B18.6.3.4B''' UNC oval countersunk head screw. |
||
<!--T:205--> |
|||
* [[Image:Fasteners_ASMEB18.6.3.9B.svg|32px]] '''ASME B18.6.3.9B''' UNC pan head screw. |
* [[Image:Fasteners_ASMEB18.6.3.9B.svg|32px]] '''ASME B18.6.3.9B''' UNC pan head screw. |
||
<!--T:206--> |
|||
* [[Image:Fasteners_ASMEB18.6.3.10B.svg|32px]] '''ASME B18.6.3.10B''' UNC fillister head screw. |
* [[Image:Fasteners_ASMEB18.6.3.10B.svg|32px]] '''ASME B18.6.3.10B''' UNC fillister head screw. |
||
<!--T:207--> |
|||
* [[Image:Fasteners_ASMEB18.6.3.12C.svg|32px]] '''ASME B18.6.3.12C''' UNC truss head screws. |
* [[Image:Fasteners_ASMEB18.6.3.12C.svg|32px]] '''ASME B18.6.3.12C''' UNC truss head screws. |
||
<!--T:208--> |
|||
* [[Image:Fasteners_ASMEB18.6.3.16B.svg|32px]] '''ASME B18.6.3.16B''' UNC round head screw. |
* [[Image:Fasteners_ASMEB18.6.3.16B.svg|32px]] '''ASME B18.6.3.16B''' UNC round head screw. |
||
Line 287: | Line 303: | ||
* [[Image:Fasteners_ISO7048.svg|32px]] '''ISO 7048''' Cheese head screw. |
* [[Image:Fasteners_ISO7048.svg|32px]] '''ISO 7048''' Cheese head screw. |
||
<!--T:209--> |
|||
* [[Image:Fasteners_ISO7049-C.svg|32px]] '''ISO 7049-C''' Pan head self tapping screws with conical point. |
* [[Image:Fasteners_ISO7049-C.svg|32px]] '''ISO 7049-C''' Pan head self tapping screws with conical point. |
||
<!--T:210--> |
|||
* [[Image:Fasteners_ISO7049-F.svg|32px]] '''ISO 7049-F''' Pan head self tapping screws with flat point. |
* [[Image:Fasteners_ISO7049-F.svg|32px]] '''ISO 7049-F''' Pan head self tapping screws with flat point. |
||
<!--T:211--> |
|||
* [[Image:Fasteners_ISO7049-R.svg|32px]] '''ISO 7049-R''' Pan head self tapping screws with rounded point. |
* [[Image:Fasteners_ISO7049-R.svg|32px]] '''ISO 7049-R''' Pan head self tapping screws with rounded point. |
||
Line 307: | Line 326: | ||
* [[Image:Fasteners_DIN603.svg|32px]] '''DIN 603''' Round head square neck bolt. |
* [[Image:Fasteners_DIN603.svg|32px]] '''DIN 603''' Round head square neck bolt. |
||
=== Set screws === |
=== Set screws === <!--T:212--> |
||
<!--T:99--> |
<!--T:99--> |
||
Line 333: | Line 352: | ||
* [[Image:Fasteners_ISO4029.svg|32px]] '''ISO 4029''' Hexagon socket set screw with cup point. |
* [[Image:Fasteners_ISO4029.svg|32px]] '''ISO 4029''' Hexagon socket set screw with cup point. |
||
<!--T:213--> |
|||
* [[Image:Fasteners_ISO4766.svg|32px]] '''ISO 4766''' Slotted socket set screw with flat point. |
* [[Image:Fasteners_ISO4766.svg|32px]] '''ISO 4766''' Slotted socket set screw with flat point. |
||
<!--T:214--> |
|||
* [[Image:Fasteners_ISO7434.svg|32px]] '''ISO 7434''' Slotted socket set screw with cone point. |
* [[Image:Fasteners_ISO7434.svg|32px]] '''ISO 7434''' Slotted socket set screw with cone point. |
||
<!--T:215--> |
|||
* [[Image:Fasteners_ISO7435.svg|32px]] '''ISO 7435''' Slotted socket set screw with long dog point. |
* [[Image:Fasteners_ISO7435.svg|32px]] '''ISO 7435''' Slotted socket set screw with long dog point. |
||
<!--T:216--> |
|||
* [[Image:Fasteners_ISO7436.svg|32px]] '''ISO 7436''' Slotted socket set screw with cup point. |
* [[Image:Fasteners_ISO7436.svg|32px]] '''ISO 7436''' Slotted socket set screw with cup point. |
||
Line 456: | Line 479: | ||
* [[Image:Fasteners_GN505.4.svg|32px]] '''GN 505.4''' Serrated T-slot bolt. |
* [[Image:Fasteners_GN505.4.svg|32px]] '''GN 505.4''' Serrated T-slot bolt. |
||
<!--T:217--> |
|||
* [[Image:Fasteners_GN506.svg|32px]] '''GN 506''' T-Slot swivel nut. |
* [[Image:Fasteners_GN506.svg|32px]] '''GN 506''' T-Slot swivel nut. |
||
Line 461: | Line 485: | ||
* [[Image:Fasteners_GN507.svg|32px]] '''GN 507''' T-slot nut. |
* [[Image:Fasteners_GN507.svg|32px]] '''GN 507''' T-slot nut. |
||
<!--T:218--> |
|||
* [[Image:Fasteners_ISO299.svg|32px]] '''ISO 299''' T-Slot nut. |
* [[Image:Fasteners_ISO299.svg|32px]] '''ISO 299''' T-Slot nut. |
||
Line 507: | Line 532: | ||
* [[Image:Fasteners_NFE27-619.svg|32px]] '''NFE27-619''' Countersunk washer. |
* [[Image:Fasteners_NFE27-619.svg|32px]] '''NFE27-619''' Countersunk washer. |
||
=== Rods, taps and dies === |
=== Rods, taps and dies === <!--T:219--> |
||
<!--T:109--> |
<!--T:109--> |
||
Line 547: | Line 572: | ||
* [[Image:Fasteners_PCBStandoff.svg|32px]] PCB standoff female/male. |
* [[Image:Fasteners_PCBStandoff.svg|32px]] PCB standoff female/male. |
||
<!--T:220--> |
|||
* [[Image:Fasteners_4PWTI.svg|32px]] 4 prong threaded wood insert (DIN 1624 Tee nuts). |
* [[Image:Fasteners_4PWTI.svg|32px]] 4 prong threaded wood insert (DIN 1624 Tee nuts). |
||
Line 560: | Line 586: | ||
* [[Image:Fasteners_DIN6799.svg|32px]] '''DIN 6799''' E-clip retaining ring. |
* [[Image:Fasteners_DIN6799.svg|32px]] '''DIN 6799''' E-clip retaining ring. |
||
=== Nails === |
=== Nails === <!--T:221--> |
||
<!--T:222--> |
|||
* [[Image:Fasteners_DIN1160-A.svg|32px]] '''DIN 1160-A''' Clout or slate nail. |
* [[Image:Fasteners_DIN1160-A.svg|32px]] '''DIN 1160-A''' Clout or slate nail. |
||
<!--T:223--> |
|||
* [[Image:Fasteners_DIN1160-B.svg|32px]] '''DIN 1160-B''' Clout or slate wide head nail. |
* [[Image:Fasteners_DIN1160-B.svg|32px]] '''DIN 1160-B''' Clout or slate wide head nail. |
||
=== Pins === |
=== Pins === <!--T:224--> |
||
<!--T:225--> |
|||
* [[Image:Fasteners_ISO1234.svg|32px]] '''ISO 1234''' Split pin. |
* [[Image:Fasteners_ISO1234.svg|32px]] '''ISO 1234''' Split pin. |
||
<!--T:226--> |
|||
* [[Image:Fasteners_ISO2338.svg|32px]] '''ISO 2338''' Parallel pin. |
* [[Image:Fasteners_ISO2338.svg|32px]] '''ISO 2338''' Parallel pin. |
||
<!--T:227--> |
|||
* [[Image:Fasteners_ISO2339.svg|32px]] '''ISO 2339''' Taper pin. |
* [[Image:Fasteners_ISO2339.svg|32px]] '''ISO 2339''' Taper pin. |
||
<!--T:228--> |
|||
* [[Image:Fasteners_ISO2340A.svg|32px]] '''ISO 2340A''' Clevis pin. |
* [[Image:Fasteners_ISO2340A.svg|32px]] '''ISO 2340A''' Clevis pin. |
||
<!--T:229--> |
|||
* [[Image:Fasteners_ISO2340B.svg|32px]] '''ISO 2340B''' Clevis pin without head (with split pin holes). |
* [[Image:Fasteners_ISO2340B.svg|32px]] '''ISO 2340B''' Clevis pin without head (with split pin holes). |
||
<!--T:230--> |
|||
* [[Image:Fasteners_ISO2341A.svg|32px]] '''ISO 2341A''' Clevis pin with head. |
* [[Image:Fasteners_ISO2341A.svg|32px]] '''ISO 2341A''' Clevis pin with head. |
||
<!--T:231--> |
|||
* [[Image:Fasteners_ISO2341B.svg|32px]] '''ISO 2341B''' Clevis pin with head (with split pin hole). |
* [[Image:Fasteners_ISO2341B.svg|32px]] '''ISO 2341B''' Clevis pin with head (with split pin hole). |
||
<!--T:232--> |
|||
* [[Image:Fasteners_ISO8733.svg|32px]] '''ISO 8733''' Parallel pin with internal thread, unhardened. |
* [[Image:Fasteners_ISO8733.svg|32px]] '''ISO 8733''' Parallel pin with internal thread, unhardened. |
||
<!--T:233--> |
|||
* [[Image:Fasteners_ISO8734.svg|32px]] '''ISO 8734''' Dowel pin. |
* [[Image:Fasteners_ISO8734.svg|32px]] '''ISO 8734''' Dowel pin. |
||
<!--T:234--> |
|||
* [[Image:Fasteners_ISO8735.svg|32px]] '''ISO 8735''' Parallel pin with internal thread, hardened. |
* [[Image:Fasteners_ISO8735.svg|32px]] '''ISO 8735''' Parallel pin with internal thread, hardened. |
||
<!--T:235--> |
|||
* [[Image:Fasteners_ISO8736.svg|32px]] '''ISO 8736''' Taper pin with internal thread, unhardened. |
* [[Image:Fasteners_ISO8736.svg|32px]] '''ISO 8736''' Taper pin with internal thread, unhardened. |
||
<!--T:236--> |
|||
* [[Image:Fasteners_ISO8737.svg|32px]] '''ISO 8737''' Taper pin with external thread, unhardened. |
* [[Image:Fasteners_ISO8737.svg|32px]] '''ISO 8737''' Taper pin with external thread, unhardened. |
||
<!--T:237--> |
|||
* [[Image:Fasteners_ISO8739.svg|32px]] '''ISO 8739''' Full-length grooved pin with pilot. |
* [[Image:Fasteners_ISO8739.svg|32px]] '''ISO 8739''' Full-length grooved pin with pilot. |
||
<!--T:238--> |
|||
* [[Image:Fasteners_ISO8740.svg|32px]] '''ISO 8740''' Full-length grooved pin with chamfer. |
* [[Image:Fasteners_ISO8740.svg|32px]] '''ISO 8740''' Full-length grooved pin with chamfer. |
||
<!--T:239--> |
|||
* [[Image:Fasteners_ISO8741.svg|32px]] '''ISO 8741''' Half-length reverse taper grooved pin. |
* [[Image:Fasteners_ISO8741.svg|32px]] '''ISO 8741''' Half-length reverse taper grooved pin. |
||
<!--T:240--> |
|||
* [[Image:Fasteners_ISO8742.svg|32px]] '''ISO 8742''' Third-length center grooved pin. |
* [[Image:Fasteners_ISO8742.svg|32px]] '''ISO 8742''' Third-length center grooved pin. |
||
<!--T:241--> |
|||
* [[Image:Fasteners_ISO8743.svg|32px]] '''ISO 8743''' Half-length center grooved pin. |
* [[Image:Fasteners_ISO8743.svg|32px]] '''ISO 8743''' Half-length center grooved pin. |
||
<!--T:242--> |
|||
* [[Image:Fasteners_ISO8744.svg|32px]] '''ISO 8744''' Full-length taper grooved pin. |
* [[Image:Fasteners_ISO8744.svg|32px]] '''ISO 8744''' Full-length taper grooved pin. |
||
<!--T:243--> |
|||
* [[Image:Fasteners_ISO8745.svg|32px]] '''ISO 8745''' Half-length taper grooved pin. |
* [[Image:Fasteners_ISO8745.svg|32px]] '''ISO 8745''' Half-length taper grooved pin. |
||
<!--T:244--> |
|||
* [[Image:Fasteners_ISO8746.svg|32px]] '''ISO 8746''' Grooved pin with round head. |
* [[Image:Fasteners_ISO8746.svg|32px]] '''ISO 8746''' Grooved pin with round head. |
||
<!--T:245--> |
|||
* [[Image:Fasteners_ISO8747.svg|32px]] '''ISO 8747''' Grooved pin with countersunk head. |
* [[Image:Fasteners_ISO8747.svg|32px]] '''ISO 8747''' Grooved pin with countersunk head. |
||
<!--T:246--> |
|||
* [[Image:Fasteners_ISO8748.svg|32px]] '''ISO 8748''' Coiled spring pin, heavy duty. |
* [[Image:Fasteners_ISO8748.svg|32px]] '''ISO 8748''' Coiled spring pin, heavy duty. |
||
<!--T:247--> |
|||
* [[Image:Fasteners_ISO8750.svg|32px]] '''ISO 8750''' Coiled spring pin, standard duty. |
* [[Image:Fasteners_ISO8750.svg|32px]] '''ISO 8750''' Coiled spring pin, standard duty. |
||
<!--T:248--> |
|||
* [[Image:Fasteners_ISO8751.svg|32px]] '''ISO 8751''' Coiled spring pin, light duty. |
* [[Image:Fasteners_ISO8751.svg|32px]] '''ISO 8751''' Coiled spring pin, light duty. |
||
<!--T:249--> |
|||
* [[Image:Fasteners_ISO8752.svg|32px]] '''ISO 8752''' Slotted spring pin, heavy duty. |
* [[Image:Fasteners_ISO8752.svg|32px]] '''ISO 8752''' Slotted spring pin, heavy duty. |
||
<!--T:250--> |
|||
* [[Image:Fasteners_ISO13337.svg|32px]] '''ISO 13337''' Slotted spring pin, light duty. |
* [[Image:Fasteners_ISO13337.svg|32px]] '''ISO 13337''' Slotted spring pin, light duty. |
||
Revision as of 21:30, 20 February 2024
Introduction
The Fasteners Workbench is an external workbench that can add various fasteners to parts.
The optional single toolbar layout of the workbench.
Fasteners with metric dimensions have orange icons.
Fasteners with inch dimensions have green icons.
Installation
- Install the Fasteners Workbench via the Addon Manager. For manual installation see Installing more workbenches.
- Restart FreeCAD.
- Select the Fasteners Workbench from the Workbench dropdown list.
- Optionally change the toolbar and menu layout:
- Go to: Edit → Preferences... → Fasteners → General settings.
- Select one of the available Toolbar screw icons grouping options:
- None: All fasteners appear in a single toolbar. To see all available buttons use the >> button to expand it.
- Separate toolbars: Fasteners are grouped in several toolbars. This is the default layout.
- Dropdown buttons: Fasteners are grouped in toolbars with flyouts.
- Optionally uncheck one or more Fastener standards shown in toolbars options. Unchecked standards are still available from the menu.
- Restart FreeCAD.
Usage
Fasteners can be attached or unattached. Attached fasteners have a Database Object, a circular edge, and their DataPlacement is dynamically linked to that object. The Fasteners Move command can be used to attach or detach a fastener.
Unattached fasteners
- Select the desired fastener by clicking its button or by picking it from the menu.
- A fastener is created at the origin.
- Optionally change the dimensions and other properties of the fastener:
- Select the fastener.
- Go to the Data tab of the Property editor.
- Change the required properties.
Attached fasteners
On the left two selected circular edges. On the right the attached fasteners.
- Specify if the selected holes are tap holes or pass holes by selecting Fasteners MatchTypeInner or Fasteners MatchTypeOuter respectively (not used for countersunk screws).
- Select one or more circular edges and/or faces with circular edges. For countersunk screws the top edge of the chamfered hole must be selected.
- Select the desired fastener by clicking its button or by picking it from the menu.
- A fastener is attached to each of the selected circular edges.
- The default dimensions of each fastener depend on the radius of the circular edge it is attached to. Countersunk screws are matched by their head diameter, other fasteners are matched by their shaft diameter.
- Optionally change the dimensions and other properties of the fasteners. See above.
- Fasteners that appear upside-down can be inverted with the Fasteners Flip command or by changing their Datainvert property.
- Optionally change the Dataoffset property to create space between the fasteners and the edges they are attached to.
Notes
- To generate threads, the Datathread property of a fastener must be changed to
true
. Generating threads is costly. Recomputes take much longer if there are many fasteners with threads in a document. - The Datainvert property and the Dataoffset property are ignored for unattached fasteners.
Commands
- Invert fastener: Invert the orientation of attached fasteners.
- Move fastener: Move and attach a fastener to a circular edge. Can also be used to detach a fastener.
- Simplify shape: Create non-parametric copies of fasteners.
- Match for tap hole: Consider circular edges to be tap holes when new fasteners are attached to them.
- Match for pass hole: Consider circular edges to be pass holes when new fasteners are attached to them.
- Generate BOM: Create a spreadsheet with a bill of materials for the fasteners in the document.
- Screw calculator: Show a calculator to determine the tap hole size of screws.
- Make countersunk: Chamfer holes for countersunk screws.
- Change fastener parameters: Change the parameters of fasteners.
Fasteners
Fasteners with metric dimensions have orange icons. Fasteners with inch dimensions have green icons.
Hexagon head screws and bolts
Hexagon socket screws
Hexalobular socket head screws
Slotted head screws
H cross head screws
Other head bolts
Set screws
Nuts
T-slot fasteners
Washers
Rods, taps and dies
Inserts
Retaining rings
Nails
Pins
References
- Author: shaise
- ScrewMaker: Ulrich Brammer
- Workbench wrapper: Shai Seger
- Home page: http://theseger.com/projects/2015/06/fasteners-workbench-for-freecad/
- Source code: https://github.com/shaise/FreeCAD_FastenersWB
- Bug reports and feature requests: https://github.com/shaise/FreeCAD_FastenersWB/issues
- Forum topic: https://forum.freecadweb.org/viewtopic.php?t=11429
Links
- Generating holes for countersunk screws in freecad
- BOLTS: An open library for technical specifications.
- External workbenches
- Macros recipes
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub