Fasteners MatchTypeInner: Difference between revisions

From FreeCAD Documentation
No edit summary
Line 21: Line 21:
==Description==
==Description==


The [[Image:Fasteners_MatchTypeInner.svg|24px]] '''Fasteners MatchTypeInner''' command behaves as a toggle with the [[Fasteners_MatchTypeOuter|Fasteners MatchTypeOuter]] command. When '''Fasteners MatchTypeInner''' is selected, circular edges are considered to be tap holes when new fasteners are attached to them. This determines the default dimensions of those fasteners.
The [[Image:Fasteners_MatchTypeInner.svg|24px]] '''Fasteners MatchTypeInner''' command behaves as a toggle with the [[Fasteners_MatchTypeOuter|Fasteners MatchTypeOuter]] command. When '''Fasteners MatchTypeInner''' is selected, circular edges are considered to be tap holes when new fasteners are attached to them. This determines the default dimensions of those fasteners. This setting is not used for countersunk screws.


==Usage==
==Usage==

Revision as of 15:46, 22 December 2021

Other languages:
This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.

Fasteners MatchTypeInner

Menu location
Fasteners → Match screws by inner thread diameter (Tap hole)
Workbenches
Fasteners
Default shortcut
None
Introduced in version
-
See also
Fasteners MatchTypeOuter

Description

The Fasteners MatchTypeInner command behaves as a toggle with the Fasteners MatchTypeOuter command. When Fasteners MatchTypeInner is selected, circular edges are considered to be tap holes when new fasteners are attached to them. This determines the default dimensions of those fasteners. This setting is not used for countersunk screws.

Usage

  1. There are several ways to invoke the command:
    • Press the Fasteners MatchTypeInner button.
    • Select the Fasteners → Match screws by inner thread diameter (Tap hole) option from the menu.
  2. The button is depressed to indicate the selected option.