FEMbyGEN Workbench: Difference between revisions

From FreeCAD Documentation
mNo edit summary
No edit summary
 
(2 intermediate revisions by one other user not shown)
Line 31: Line 31:
# Summation of all load case results will also be under Results in the [[Tree_view|tree view]].
# Summation of all load case results will also be under Results in the [[Tree_view|tree view]].
# If you want to get a recommendation for your design instead of parametric analysis, click on {{Button|CreatGeo}} to define the boundary conditions of your design, such as loads, supports, protection geometries. After that it will create a boundbox and then optimize it to suggest you the most suitable geometry. You can use the slider to see previous suggestions.
# If you want to get a recommendation for your design instead of parametric analysis, click on {{Button|CreatGeo}} to define the boundary conditions of your design, such as loads, supports, protection geometries. After that it will create a boundbox and then optimize it to suggest you the most suitable geometry. You can use the slider to see previous suggestions.
# Click {{Button|Topology}} to run the topology simulation for generations or just the file with fem analysis defined. On the screen you can define your optimization parameter and it will eventually show the results. Buttom slider will help you to see the progress of the topology optimization.
# Click {{Button|Topology}} to run the topology simulation for generations or just the file with FEM analysis defined. On the screen you can define your optimization parameter and it will eventually show the results. the bottom slider will help you to see the progress of the topology optimization.


=== Features === <!--T:6-->
=== Features === <!--T:6-->
Line 37: Line 37:
<!--T:7-->
<!--T:7-->
* Parametric FEM analysis
* Parametric FEM analysis
* Supports multiple loadcases
* Supports multiple load cases
* Summarize all the results in a table
* Summarize all the results in a table
* Sort results by your output weight
* Sort results by your output weight
Line 47: Line 47:


<!--T:9-->
<!--T:9-->
* Implementation other than beso topology method
* Implementation other than BESO topology method


=== Limitations === <!--T:10-->
=== Limitations === <!--T:10-->


<!--T:11-->
<!--T:11-->
* Works only with Calculix Solver
* Works only with CalculiX Solver


== Installation == <!--T:12-->
== Installation == <!--T:12-->
Line 65: Line 65:


<!--T:22-->
<!--T:22-->
The FEMbyGEN code is hosted and developed [https://github.com/Serince/FEMbyGEN FEMbyGEN on GitHub.com].
The FEMbyGEN code is hosted and developed on [https://github.com/Serince/FEMbyGEN GitHub.com].


=== Manual === <!--T:15-->
=== Manual === <!--T:15-->

Latest revision as of 20:35, 6 December 2023

Other languages:
FEMbyGEN Workbench icon

Introduction

FEMbyGEN is a FreeCAD addon. It provides a simple interface to choose the best solution by showing the structural behavior of your designs on screen for parametric analysis and multiple loading situations.

Intended work-flow

  1. Click the Initiate button to create the parameters for the parametric analysis.
  2. Using the Alias button please match the size and name of the parameters.
  3. Associate the Spreadsheet and your model.
  4. Set up analysis model(s) with the FEM Workbench.
  5. Switch back to the FEMbyGEN Workbench and with the Generate button, create all generations.
  6. Click on the FEA button and Start FEA to run simulations.
  7. You can check simulation files by clicking rows of the related generation.
  8. Click on the Results button to get results into the master file.
  9. Summation of all load case results will also be under Results in the tree view.
  10. If you want to get a recommendation for your design instead of parametric analysis, click on CreatGeo to define the boundary conditions of your design, such as loads, supports, protection geometries. After that it will create a boundbox and then optimize it to suggest you the most suitable geometry. You can use the slider to see previous suggestions.
  11. Click Topology to run the topology simulation for generations or just the file with FEM analysis defined. On the screen you can define your optimization parameter and it will eventually show the results. the bottom slider will help you to see the progress of the topology optimization.

Features

  • Parametric FEM analysis
  • Supports multiple load cases
  • Summarize all the results in a table
  • Sort results by your output weight
  • Summation of all load cases
  • Geometry suggestion based on your boundary condition
  • Topology optimization

Features to be supported in the future

  • Implementation other than BESO topology method

Limitations

  • Works only with CalculiX Solver

Installation

Addon Manager

FEMbyGEN can easily be installed via the FreeCAD Addon Manager from the Tools → Addon manager menu.

FEMbyGEN is under active development and will get new features frequently. Therefore you should update it regularly using also the menu Tools → Addon manager.

The FEMbyGEN code is hosted and developed on GitHub.com.

Manual

See How to install additional workbenches

Prerequisites

  • FreeCAD 0.19 or newer

References