FEM: Constraint Heat flux

From FreeCAD Documentation
Revision as of 17:36, 9 November 2018 by Luc (talk | contribs) (Created page with "Această constrângere specifică schimbul de căldură (transferul de căldură al filmului) al unei suprafețe la temperatura ''T'' și cu un coeficient de schimb termic h...")

FEM ConstraintHeatflux

Menu location
Model → Thermal Constraints → Constraint heatflux
Workbenches
FEM
Default shortcut
None
Introduced in version
-
See also
FEM tutorial

Descriere

Această constrângere specifică schimbul de căldură (transferul de căldură al filmului) al unei suprafețe la temperatura T și cu un coeficient de schimb termic h și o temperatură ambiantă T0 . Fluxul de căldură convectiv q poate satisface: q = h(T -T0)

Use

  1. Click on or choose ModelThermal Constraints Constraint heatflux from the top menu.
  2. Select in the 3D-view the surface(s) the constraint should be applied to.
  3. Enter the desired surface temperature, film coefficient and environment temperature.

Limitations

Notes

  1. The constraint uses the *FILM card in CalculiX. The heatflux constraint is explained at http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node203.html