FCGear TimingGear: Difference between revisions
BavariaSHAPE (talk | contribs) No edit summary |
BavariaSHAPE (talk | contribs) No edit summary |
||
Line 21: | Line 21: | ||
|SeeAlso= |
|SeeAlso= |
||
}} |
}} |
||
<font color=red>This page is currently under construction.</font> |
|||
==Description== |
==Description== |
Revision as of 15:42, 25 August 2020
FCGear TimingGear |
Menu location |
---|
FCGear → Create a Timing gear |
Workbenches |
FCGear |
Default shortcut |
None |
Introduced in version |
v0.16 |
See also |
None |
Description
The purpose of timing gears is to allow the camshaft and crankshaft to turn the timing chain. The crankshaft turns to move pistons up and down inside the cylinders. The camshaft turns to allow intake and exhaust valves on the cylinders to open and close. These components are important for proper engine timing.
Timing gears are connected to a timing belt or timing chain.
Usage
- Switch to the FCGear Workbench.
- Invoke the command several way:
- Press the Create a Timing gear button in the tool bar.
- Using the Gear Menu → Timing gear.
- Change the gear parameter to the required conditions (see Properties → Data below).
Properties
Data
Base
- DataPlacement: Placement is the location and orientation of an object in space.
- DataLabel: User name of the object in the Tree view.
computed
- Datah: Radial height of teeth (not changeable, is calculated automatically).
- Dataoffset: X-Offset of second arc mid-point (not changeable, is calculated automatically).
- Datapitch: Pitch of gear (not changeable, is calculated automatically).
- Datar0: Radius of first arc (not changeable, is calculated automatically).
- Datar1: Radius of second arc (not changeable, is calculated automatically).
- Datars: Radius of third arc (not changeable, is calculated automatically).
- Datau: Radial difference between pitch … diameter and head of gear (not changeable, is calculated automatically).
gear_parameter
- Dataheight: Default is 5,00 mm. Value of the gear width.
- Datateeth: Default is 20. Number of teeth.
- Datatype: Default is gt2. Type of timing gear – profile pitch for timing belts (see also the information in Notes).
View
The parameter descriptions of the View tab will be found in Property editor, further below at Example of the properties of a PartDesign object.
Notes
- type: The pitch of the timing belts (distance from tooth centre to tooth centre of consecutive teeth) is specified in types. GT2 has a pitch of 2 mm, GT3 of 3 mm, GT5 of 5 mm etc..
Limitations
Limitation are not known yet.
Useful formulas
- addendum diameter = pitch diameter + 2 * module
- belt length = 2 * axle base + belt tooth pitch : 2 * (teeth 1 + 2) + belt tooth pitch² : 4 * pi² * axle base * (teeth 1 - 2)²
- axle base = belt length : 4 - belt tooth pitch : 8 * (teeth 1+2) + ¼ * sqrt [belt length - ½ * belt tooth pitch * (teeth 1+2)² - 2 * belt tooth pitch² * (teeth 1+2)² : pi²]