FCGear Engrenage à développante interne

From FreeCAD Documentation
Revision as of 09:18, 1 October 2022 by David69 (talk | contribs) (Created page with "Un objet FCGear InternalInvoluteGear est dérivé d'un Part Feature et hérite de toutes ses propriétés. Il possède également les propriétés supplém...")

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Other languages:

FCGear Engrenage à développante interne

Emplacement du menu
Gear → Internal Involute Gear
Ateliers
FCGear
Raccourci par défaut
Aucun
Introduit dans la version
1.0
Voir aussi
FCGear Engrenage à développante

Description

Engrenages à développante interne, de gauche à droite : engrenage droit, engrenage hélicoïdal, engrenage hélicoïdal double

Utilisation

  1. Passez à l' atelier FCGear.
  2. Il y a plusieurs façons de lancer la commande :
    • Appuyez sur Internal Involute Gear dans la barre d'outils.
    • Sélectionnez l'option Gear → Internal Involute Gear dans le menu.
  3. Modifiez le paramètre de l'engrenage en fonction des conditions requises (voir Propriétés).

Propriétés

Un objet FCGear InternalInvoluteGear est dérivé d'un Part Feature et hérite de toutes ses propriétés. Il possède également les propriétés supplémentaires suivantes :

Data

accuracy

  • Donnéesnumpoints (Integer): Default is 6. Change of the involute profile. Changing the value can lead to unexpected results.

base

  • Donnéesheight (Length): Default is 5,00 mm. Value of the gear width.
  • Donnéesmodule (Length): Default is 1,00 mm. Module is the ratio of the reference diameter of the gear divided by the number of teeth (see Notes).
  • Donnéesteeth (Integer): Default is 15. Number of teeth (see Notes).
  • Donnéesthickness (Length): Default is 5,00 mm. Thickness of the uncut outer part of the gear.

computed

  • Donnéesangular_backlash (Angle): (read-only)
  • Donnéesda (Length): (read-only) Inside diameter, measured at the addendum (the tip of the teeth).
  • Donnéesdf (Length): (read-only) Root diameter, measured at the foot of the teeth.
  • Donnéesdw (Length): (read-only) Working pitch diameter.
  • Donnéesoutside_diameter (Length): (read-only) Outside diameter.
  • Donnéestransverse_pitch (Length): (read-only) Pitch in the plane of rotation.

fillets

  • Donnéeshead_fillet (Float): Default is 0,00 mm.
  • Donnéesroot_fillet (Float): Default is 0,00 mm.

helical

  • Donnéesbeta (Angle): Default is 0,00°. With the helix angle β a helical gear is created – positive value → rotation direction right, negative value → rotation direction left (see Notes).
  • Donnéesdouble_helix (Bool): Default is false. true creates a double helix gear (see Notes).
  • Donnéesproperties_from_tool (Bool): Default is false. If helix angle β is given and properties_from-tool is true, gear parameters are internally recomputed for the rotated gear.

involute

  • Donnéespressure_angle (Angle): Default is 20,00°. (see Notes).
  • Donnéesshift (Float): Default is 0,00. Generates a positive and negative profile shift (see Notes).

precision

  • Donnéessimple (Bool): Default is false. true generates a simplified display (without teeth and only a cylinder in pitch diameter).

tolerance

  • Donnéesbacklash (Length): Default is 0,00 mm. Backlash, also called lash or play, is the distance between the teeths at a gear pair.
  • Donnéesclearance (Float): Default is 0,25. (see Notes).
  • Donnéeshead (Float): Default is -0,40 mm. This value is used to change the tooth height.
  • Donnéesreversed_backlash (Bool): true backlash decrease or false (default) backlash increase (see Notes).

version

  • Donnéesversion (String):

Notes

See FCGear InvoluteGear.

Useful formulas

See FCGear InvoluteGear.

Scripting