FCGear Crémaillère cycloïde

From FreeCAD Documentation
Revision as of 20:10, 30 September 2022 by David69 (talk | contribs) (Created page with "Un objet FCGear CycloidRack est dérivé d'un Part Feature et hérite de toutes ses propriétés. Il possède également les propriétés supplémentaires...")

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Other languages:

FCGear Crémaillère cycloïde

Emplacement du menu
Gear → Cycloid Rack
Ateliers
FCGear
Raccourci par défaut
Aucun
Introduit dans la version
1.0
Voir aussi
FCGear CycloidGear

Description

Crémaillères cycloïdes de gauche à droite : engrenage droit, engrenage hélicoïdal, engrenage hélicoïdal double

Utilisation

  1. Passez à l' atelier FCGear.
  2. Il existe plusieurs façons de lancer la commande :
    • Appuyez sur 16px Cycloid Rack dans la barre d'outils.
    • Sélectionnez Gear → Cycloid Rack dans le menu.
  3. Modifiez le paramètre de l'engrenage en fonction des conditions requises (voir Propriétés).

Propriétés

Un objet FCGear CycloidRack est dérivé d'un Part Feature et hérite de toutes ses propriétés. Il possède également les propriétés supplémentaires suivantes :

accuracy

  • Donnéesnumpoints (Integer): (number of points for spline), default is 15.

base

  • Donnéesadd_endings (bool): Default is true, If enabled, the total length of the rack is teeth x pitch, otherwise the rack starts with a tooth-flank.
  • Donnéesheight (Length): Default is 5,00 mm. Value of the gear width.
  • Donnéesteeth (Integer): Default is 15. Number of teeth.
  • Donnéesthickness (Length): Default is 5,00 mm. Thickness of the uncut part of the rack.

computed

  • Donnéestransverse_pitch (Length): Default is 0,00 mm. Pitch in the transverse plane. (read-only)

cycloid

  • Donnéesinner_diameter (Float): Default is 7,50. Diameter of the rolling circle of hypocycloid, normalized by the Donnéesmodule (see Notes).
  • Donnéesouter_diameter (Float): Default is 7,50. Diameter of the rolling circle of epicycloid, normalized by the Donnéesmodule (see Notes).

fillets

  • Donnéeshead_fillet (Float): Default is 0,00.
  • Donnéesroot_fillet (Float): Default is 0,00.

helical

  • Donnéesbeta (Angle): Default is 0,00°. With the helix angle β a helical gear is created (positive value → rotation direction right, negative value → rotation direction left).
  • Donnéesdouble_helix (Bool): Default is false. true creates a double helix gear (see Notes).

involute

  • Donnéesmodule (Length): Default is 1,00 mm. For racks the module equals the pitch and so is the distance between corresponding points on adjacent teeth (see Notes).

precision

  • Donnéessimplified (Bool): Default is false. If true the rack is drawn with a constant number of teeth to avoid topologic renaming.

tolerance

  • Donnéesclearance (Float): Default is 0,25 (see Notes).
  • Donnéeshead (Float): Default is 0,00. Additional length of the tip of the teeth, normalized by the Donnéesmodule.

version

  • Donnéesversion (String):

Notes

See FCGear CycloidGear.

Useful formulas

See FCGear CycloidGear.

Scripting